EMS 7703 Installation Instructions Manual page 7

EMS SYSTEM 7000
Switch
1 Buzzer follows Alarm LED
2 Buzzer Follows Local LED
3 Buzzer sounds for 4 seconds in Clear and Test
4 Buzzer Follows Low Battery LED
5 Buzzer sounds when receiving any valid transmission with key in TEST
6 Buzzer follows RI LED (not with Key in TEST)
7 Buzzer sounds on mains fail
8 Buzzer follows Local LED but with 5 second delay
2.9 Check all options, functions and relays operate correctly.
shown in Table 5.
Transmitter Operation
Green button pressed
Both side buttons pressed
2.10 Re-check 2.5.
2.11 Holding the front panel to the main body of the receiver add the 4 screws previously
removed.
Switch On
Table 4
Relay Operation
Local relay operates.
Alarm, relay operates.
Table 5
7703 INSTALLATION, ISSUE V2.2 – 13/04/10
7
The relays should operate as