Prism Sound Titan Operation Manual page 61

Prism Sound Titan
Analog Line Inputs
Configuration:
Input sensitivity:
Input impedance:
Unbalanced mode:
Total harmonic
distortion:
THD+n:
Dynamic range:
Gain accuracy:
LF roll-off:
HF roll-off:
CMRR:
Inter-channel cross-talk: 1kHz: <-140dB; 20Hz..20kHz: <-120dB
Inter-channel phase:
Overkiller:
Impact filter:
RIAA de-emphasis filter: Response accuracy: ±0.22dB at fs=44.1kHz; ±0.14dB at fs=48kHz;±
MS matrix:
Microphone Preamplifiers
Configuration:
Gain:
Gain accuracy:
Input impedance:
THD
THD+n:
Equivalent input noise
(EIN):
LF roll-off:
HF roll-off:
CMRR:
Phantom power:
Pad:
Instrument Preamplifiers
Configuration:
Gain:
Gain accuracy:
Input impedance:
© 2013 Prism Media Products Ltd
Operation Manual
Electronically balanced, with fully-balanced analog signal path
Switchable '+4dBu' (0dBFS=+18dBu) or '-10dBV' (0dBFS=+6dBu)
14.5kR
Automatic
-117dB (0.00014%, -0.1dBFS)
-111dB (0.00028%, -0.1dBFS)
116dB (-60dBFS)
±0.05dB
-0.05dB at 8Hz; -3dB at <1Hz
fs=44.1kHz: -0.05dB at 21.1kHz; -3dB at 22.0kHz
fs=48kHz: -0.05dB at 23.0kHz; -3dB at 23.9kHz
fs=96kHz: -0.05dB at 32.0kHz, -3dB at 47.9kHz
fs=192kHz: -0.05dB at 32.0kHz, -3dB at 78.0kHz
20Hz..20kHz: >70dB
10Hz..5kHz: ±0.25º, 5kHz..20kHz: ±1.0º, 20kHz..50kHz: ±2.0º
Progressive limiter, auto-aligning, selectable per channel
High-pass filter, -3dB at 80Hz, 40dB/decade (selectable for channels 1-2;
whether in line, mic or instrument mode)
0.015dB at all other sample rates
Allows direct connection of mid-side mics, or non-matrix mic-preamps
(selectable for all analog input channels, whether in line or mic mode)
Electronically balanced, with fully-balanced analog signal path
10dB to 65dB in 1dB steps (0dBFS = -56dBu to -1dBu)
±0.05dB
5.5kR
+10dB gain: -116dB at -0.1dBFS (0.00016%)
+40dB gain: -110dB at -0.1dBFS (0.00032%)
+10dB gain: -108dB at -0.1dBFS (0.00040%)
+30dB gain: -128.5dBu (0R source); -126.3dBu (150R source)
+40dB gain: -130.9dBu (0R source); -127.6dBu (150R source)
+50dB gain: -131.2dBu (0R source); -127.7dBu (150R source)
+60dB gain: -131.4dBu (0R source); -127.8dBu (150R source)
-0.05dB at 20Hz; -3dB at 5Hz
As per Analog Line Input data (dependent on fs)
50Hz/60Hz: >110dB at all gains
1kHz: >100dB at all gains
20kHz: >90dB at all gains
+48V, switchable per channel
-20dB, switchable per channel
Unbalanced, high impedance buffer
10dB to 65dB in 1dB steps, 18dB pad (0dBFS = -38dBu to 17dBu)
±0.05dB
1MR
Revision 1.00
1.55