Rear Panel - Prism Sound Titan Operation Manual

Prism Sound Titan
· Meter input/output indicator: shows whether the bar-graph meters are assigned to the analogue and
S/PDIF inputs (IP indicator is lit), or to the analogue and S/PDIF outputs (OP indicator is lit). This is
selected in the Titan Control Panel
· Overkiller indicators: indicate that the
Note that the indication is dynamic, and shows when the Overkiller is actually limiting, and not
simply that it is enabled. Note that the Overkiller indicators are only active when the meters are in
input mode.
· DI unlock indicator: indicates that the S/PDIF input is unlocked, i.e. no S/PDIF carrier is recognised.
Only active when the meters are in input mode.
· SRC indicator: shows that the SRC (sample-rate converter) is
the meters are in input mode) or is
mode).
5.4

Rear panel

Titan's rear panel contains all Titan's connections, except for the instrument inputs and headphone
output, which are on the
From left to right (viewed from rear):
· 6A IEC inlet (regional power cord supplied): adjacent is the mains
· RJ45 100Mbps Ethernet port: reserved for future use.
· USB 2.0 device port for connection to host computer (cable supplied).
· Wordclock output and input BNC sockets: the Wordclock output can supply base-clock or 256x
clock if required. See the
· MDIO module slot: allows connection to a non-USB host via an optional MDIO (multi-channel IO)
expansion module, as described in the
· TOSLINK output and input: can be used for S/PDIF (up to 192kHz sample rate) or ADAT
(44.1kHz/48kHz, or 88.2kHz/96kHz in SMUX mode). See
· S/PDIF output and input RCA sockets: these can also be operated as AES3 interfaces (RCA-XLR
and XLR-RCA adapter cables supplied). See
· Line output TRS jacks 1-8: switchable +4dBu/-10dBV level, can operate in balanced or unbalanced
mode. See Analogue
· Line input TRS jacks 5-8: switchable +4dBu/-10dBV level, can operate in balanced or unbalanced
mode. See Analogue
· Mic/Line input Combos 1-4: for microphones, with 10dB to 65dB finely-adjustable gain, switchable -
20dB pad and switchable phantom power. See
© 2013 Prism Media Products Ltd
app. See the
Overkiller progressive limiter
configured in the S/PDIF output
front panel.
Synchronization section.
MDIO expansion slot
outputs.
inputs.
Operation Manual
Metering system section for more details.
is operating in that channel.
configured in the S/PDIF input
(when the meters are in output
fuse
section.
Digital inputs
Digital inputs and Digital
Analogue inputs.
Revision 1.00
(when
holder.
and Digital outputs.
outputs.
1.31