Kenwood KDV-MP3346 Instruction Manual page 6

The following settings can only be done when the unit is on standby state.
Item
KEY BEEP
TDF ALARM
AUX SET
( 21)
SWITCH PRE • REAR
SP SELECT
PAL/NTSC
FILE TYPE
( 20)
When a call comes in...
"CALL" appears on the display and the audio system is paused.
• When the call ends, "CALL" disappears and the audio system resumes.
You can also resume the audio system by pressing
Make sure the MUTE lead is connected to a mobile phone system in your car.
( Installation/Connection Manual).
6 ENGLISH
• ON : Activates the keypress tone.
• OFF : Deactivates the keypress tone.
• ON : When you turn off the ignition switch of the car, the unit beeps if the
control panel is not detached. Detach the control panel to reduce the
possibility of theft.
• OFF : Cancels.
• ON : Enables "AUX" in source selection.
• OFF : Disables "AUX" in source selection.
: Selects if the REAR/SW terminals on the rear of this unit are used for
connecting the speakers (through an external amplifier).
• SUBW : Selects if the REAR/SW terminals on the rear of this unit are used for
connecting a subwoofer (through an external amplifier).
— : Selects the connected speaker size for strong bass and to improved
clarity.
OFF, 5/4, 6 × 9/6, OEM
• PAL : Selects this if your monitor is of the PAL color system.
• NTSC : Selects this if your monitor is of the NTSC color system.
• A + V : Selects to play only audio and/or video files.
• PIC : Selects to play JPEG files.
Selectable setting, [
SRC during a conversation.
]
Initial