Table of Contents
Advertisement
Remote control functions
Installing Batteries in the Remote
1. Remove the battery cover as shown on the left.
2. Install two AAA batteries with their poles as shown on the right.
3. Replace the battery cover.
CAUTION:
Do not leave the remote in direct sunlight, such as on the
dashboard.
NOTE:
The supplied batteries are for operational checks, and may not
last as long as regular alkaline batteries.
When the remote-controllable distance is reduced, replace both
batteries with new ones.
LZH-70W User Manual
Power button:
Press to turn the
console on and off.
Mute button:
Press to temporarily
mute the sound to the wired
headphones; press again to restore
the sound.
Source buttons:
Press to access
the Video 1, Video 2 and Aux inputs.
Menu button:
Activates the screen
adjustment modes.
Volume buttons:
Controls volume
to the wired headphone jacks and
wired A/V output connections.
(Note: The KPH-IR70 wireless
headphones have built-in volume
controls for use with the LZH-70W.)
• When the MENU button is
pressed, use the volume buttons
to
perform
the
adjustments.
Dimmer button:
Press to reduce
the LCD screen's brightness for
night-time viewing; press again to
restore full brightness.
Basic Console Operation
Turning the console on and off
1. Slide the screen release button away from the screen to unlock
the screen.
2. Pivot the screen downward until a comfortable viewing angle is
reached. The internal friction detent will hold the screen in posi-
tion while the console is in use.
various
3. Press the POWER button on the console or the remote to turn it
on and off. When the console is on, internal backlighting will
illuminate the controls.
• After the unit has been turned on and is displaying a picture,
adjust the viewing angle and Dimmer control to optimize the
picture quality.
• Pivot the screen to the locked position when not in use. The
power will automatically turn off.
Console dome lights
The LZH-70W's dome lights are controlled by the three position
sliding switch. Sliding the switch to the ON position will turn the
lights on. The AUTO position will allow the lights to turn on and off
with the vehicle's interior lighting, and the OFF position will pre-
vent the lights from turning on at all times.
• Do not leave the vehicle unattended with the dome light switch
in the ON position, as this could discharge the vehicle's battery.
Connecting an auxiliary audio/video source
Make sure the console's power is OFF before making any connections
The Auxiliary A/V
Input lets you con-
nect optional A/V
equipment, such as
a
camcorder
video game. The
connectors can be
accessed by remov-
ing their protective plastic cover located behind the screen hinge.
Use RCA cables to connect the audio and video signals to their
respective jacks. Mono audio sources will require the use of an
RCA Y-cable to connect to both right and left inputs.
or
5
Advertisement
Table of Contents
