Programming; Manual Code Search - Steren RM-100 Instruction Manual

4. PROGRAMMING

There are three methods of programming (A, B and C). Choose the desired one.
A. Manual code search
Manually turn on the desired device and leave it turned on. Look for the brand of your
appliance in the list of codes and start with the fi rst code of that brand. Repeat steps 2
through 5 until you fi nd the correct code. If no code list work properly (or the brand of your
device is not on the list), use the B or C programming methods.
1. Find the brand of your appliance in the list of
codes and start with the fi rst code in the list.
For example, if your TV is brand Accuscan, the
fi rst code is 0004.
2. In the RM-100, press at the same time the
PRESS&HOLD
keys SET and the corresponding to the device
that you want to control: TV, VCR, CBL SAT, Set
DVD, PVR, CD, AUD, or MS (My system).
POWER
For example, to program the control with your
MY SYSTEM
MS
TV, hold down SET+TV.
GUIDEI NFO
6 6