Manual Programming - Steren RM-25 Instruction Manual

3. PROGRAMMING

3.1 Manual programming

1 .- In the section "Programming code" locate the available code for your device SAT,
DVD, VCR, AUX or TV.
2. - Turn manually the desired device on (SAT, DVD, VCR, AUX or TV).
4.- Aim the remote control directly to your device and
press the ON/OFF button, if the configuration was
successful your component works according with the
RM-25.
If the device does not turn off, please repeat step 3
using a different code.
If the remote control buttons do not work, may be because your TV does not have that
function. Check your TV's instruction manual.
If the remote control buttons do not work correctly, please try entering other code
compatible with your device.
If none of these codes can make your remote controller work normally (or the brand of
your household electrical appliance is not in the table), please set up by the Automatic
programming section.
3.- Press and hold the key of the desired device and at the
same time enter the code.
Testing the effectiveness of remote control keys.
When introducing any code wrong, LED lights up 4 times and
leave the function programming.
7