Automatic Search - Steren RM-100 Instruction Manual

4. PROGRAMMING
C. Automatic search
1. Manually turn on the TV that you want to
program. Point the control toward the TV receiver.
PRESS&HOLD
Set
POWER
MY SYSTEM
MS
GUIDEI NFO
3. Press the SET buttons and POWER at the same time and
release them so the LED is activated.
4. Once the led begins to fl ash, the RM-100 will enter in
ENTER TV/AV
automatic search mode.
PRESS&HOLD
Set
POWER
PVR
MENU
MY SYSTEM
MS
SLP
GUIDEI NFO
PIP
LIVE TV
EXIT
6. Once the devices are confi gured on the remote control, you must select the desired mode: ENTER TV/AV
REC
TV, VCR, etc. and operate the RM-100 normally.
PVR
MENU
2. Press once the button of the computer that you want to
program. The indicator light once.
5. When the device turns off, press any key on the remote
control to end programming.
Check the control buttons to make sure that they work properly.
PRESS&HOLD
Set
POWER
MY SYSTEM
MS
GUIDEI NFO
ENTER TV/AV
PVR
MENU
SLP
PIP
9 9