Table of Contents
Advertisement
USB and SD-card MP3 playback
This unit is equipped with a USB socket which can accept and play MP3 files stored on standard
USB flash drives (also known as "pen drives") which are for memory storage (compatible with USB
version 1.1 and 2.0). The unit also has a built-in SD-card socket, which accepts and plays MP3 files
stored on standard SD type flash memory cards (of maximum capacity 4 Gb).
To use this function, first, open the USB/SD compartment door (upwards), insert a USB flash drive
or an SD-card into the corresponding socket.
Press USB/SD once to switch to USB-CARD mode.
Within 30-60 seconds the display will indicate the number of MP3 songs found on the USB-drive or
SD-card, and also the number of folders on the device.
Press FOLDER button repeatedly to select the desired folder number.
Press NEXT or BACK buttons to skip forward or backward to select the needed file in the selected
folder.
Press PLAY/PAUSE button to start or pause the playback.
All operations of USB and SD-cards MP3 playback are the same as in CD-MP3 mode.
Note: Although this product is fully compatibly with USB 1.1 and 2.0 standards, a small percentage
(about 5%) of USB flash drives might not be readable, due to those USB flash drive manufacturers non-
compliance with the full (official) USB 1.1/2.0 standards.
Important:
Please do not use an USB extension cable to connect your USB flash drive to the USB port of this
unit. Such cables can pick up additional interference, which can corrupt the data flow, preventing
normal operation and usage of the USB port. Always connect your USB flash drive directly to the
USB port without any USB extension cables.
The reading time for USB-drive or SD-card varies depending on the speed of the memory device and
the number of songs and folders. In some cases the reading time may be as long as 60 seconds.
- 14 -
Advertisement
Table of Contents
