Table of Contents
Advertisement
? When the MONITOR OUT DATE / TIME is set to "ON", the DATE / TIME will be shown on the
MONITOR OUT display.
? When the VCR OUT DATE / TIME is set to "ON", the DATE / TIME will be shown on the
QUAD OUT display.
? SEQUENCE: There are eight positions to select and setup the random switching sequence.
Where: Q? QUAD display; 1? CH1 Full display; 2? CH2 Full display; 3? CH3 Full display; 4
? CH4 Full display; ? Skip.
?NOTICE:
? In AUTO-SWITCH MODE channels that are disconnected or have video loss will automatically be
skipped.
? When no sequence is set in the AUTO SEQUENCE MODE, "NO SEQUENCE SETTING" will be
displayed on the monitor, which activates the buzzer alarm.
? DWELL TIME: Sets the interval time corresponding to each sequence position. (Time range: 0~9
seconds.)
?NOTICE:
? When all dwell times are set to 0 in the AUTO SEQUENCE MODE, "NO SEQUENCE TIME
SETTING" will be displayed on the monitor, which activates the buzzer alarm.
? When no sequence is set and all dwell times are set to 0 in the AUTO SEQUENCE MODE,
"SEQUENCE SETTING ERROR" will be displayed on the monitor, which activates the buzzer alarm.
3.2.4.3 DISPLAY SETUP.
Figure 2. DATE / TIME display location
CH1:
CH2:
BRIGHT
64
BRIGHT
CONTRAST 64 CONTRAST 64
HUE
80 HUE
64
80
12
Advertisement
Table of Contents
