Table of Contents
Advertisement
? Press key [1 ~ 4 ] again in 2 ?2 zoom image display, the processor will then freeze1 ~ 4 quadrant 2 ?
2 zoom image and the message "FREEZE" will be shown on the monitor. To unfreeze, press? QUAD?
function key, or press key [1 ~ 4 ] again.
3.2.4 SYSTEM SETUP.
3.2.4.1 SYSTEM SETUP DESCRIPTION.
??Press the? MENU? function key to enter the MENU page (shown by Figure 1).
??Press the« ? » and« ? » buttons to change the field left and right. Pressing them more than 1 second
allows the field to change quickly left or right.
??Buttons« + » or« - » are used for increasing or decreasing a value. Pressing them more than 1 second
allows the value to increase or decrease by more than one value.
??After the setting value has been finalized, press the« ? » and« ? » buttons to change the field left or
right or press the« NEXT PAGE» key to disengage and leave this setting page.
3.2.4.2 DATE / TIME SETUP
? DATE FORMAT: There are three kinds of DATE formats for display:
??? YY/MM/DD ? MM/DD/YY ? DD/MM/YY ?
« + »
? DATE range: Year data from 2000 to 2099, Month data from 01 to 12, Day data from 01 to 30.
? TIME format: HH: MM: SS for display, Hour data from 00 to 23, Minute data from 00 to 59, Second
data from 00 to 59.
? LOCATION: There are six positions for the DATE / TIME display. On the LEFT TOP, TOP,
RIGHT TOP, RIGHT BOTTOM, BOTTOM and LEFT BOTTOM. (The default is BOTTOM)
LEFT TOP
2003.11.06
10: 20: 36
... DATE/TIMES SETUP ...
DATE FORMAT:
DATE: 2003.08.27
TIME: 12:35:50
LOCATION: BOTTOM
MONITOR OUT DATE\TIME: ON
VCR OUT DATE\TIME: ON
-- SEQUENTIAL SETTING —-
SEQUENCE:
A 1 2 3 4 . . .
DWELL TIME:
3 3 3 3 3 0 0 0
« + »
YY? MM? DD
« - »
Figure 2. DATE format with rolling mapping.
? The default is 2003? 01? 01
TOP 2003.11.06 10: 20: 36
YY.MM.DD
Figure 1.
« + »
MM? DD? YY
« - »
DD? MM? YY
« - »
RIGHT TOP
2003.11.06
10: 20: 36
11
Advertisement
Table of Contents
