gio Vyper 4WD 1100cc 2 seater Owner's Manual page 40

Vehicle Break-in Period
Engine and Drivetrain Break-in
1. Fill the fuel tank with gasoline. Always exercise extreme caution whenever handling gasoline.
Never allow a child to handle gasoline.
2. Check the oil level. See page 52. Add the recommended oil as needed to maintain the oil level in
the safe operating range.
3. Complete the New Operator Driving Procedures outlined on pages 37-38.
4. Avoid aggressive use of the brakes. See Brake System Break-in below.
5. Vary throttle positions. Do not operate at sustained idle.
6. Perform regular checks on fluid levels, controls and areas outlined on the daily pre-ride inspection
checklist. See page33.
7. Change the engine oil at 10 hours or one month.
Brake System Break-in
Apply only moderate braking force for the first 50 stops. Aggressive or overly forceful braking when
the brake system is new could damage brake pads and rotors.
CVT Break-in (Clutches/Belt)
A proper break-in of the clutches and drive belt will ensure a longer life and better performance.
Break in the clutches and belt by operating at slower speeds during the break-in period as
recommended. Avoid aggressive acceleration and high speed operation during the break-in period.
32
OPERATION