Activate Your Phone - Kyocera Hydro EDGE User Manual


Slide the battery cover lock to the locked position.
Note: When you insert the battery, your phone may power on automatically.
2. Charge your battery.

Plug the smaller end of the USB cable into the phone's charger/accessory jack.

Plug the other end of the USB cable into the charger, and then plug the charger into
an electrical outlet.
Note: Your phone's battery should have enough charge for the phone to turn on and find a
signal, set up voicemail, and make a call. You should fully charge the battery as soon as
possible.
3. Press and hold the Power button to turn the phone on.

If your phone is activated, it will turn on and search for network service.

If your phone is not yet activated, see

Activate Your Phone

Follow the instructions below to activate your phone if it has not already been activated.
Depending on your account or how and where you purchased your phone, it may be ready to
use or you may need to contact your network service provider.
●
If you purchased your phone at a store, it is probably activated and ready to use.
●
If you received your phone in the mail and it is for a new wireless account or a new line
of service, it is designed to activate automatically.
Get Started
Activate Your Phone for more information.
4