Activate Your Phone - Kyocera Kona User Manual


Insert the battery, contacts end first, and gently press into place.

Replace the cover, making sure all the locking tabs of the cover are seated with no
gaps.
Note: When you insert the battery, your phone may power on automatically.
2. Charge your battery.

Plug the USB connector into the charger/accessory jack on the lower left side of your
phone.

Plug the AC adapter into an electrical outlet.
Note: Your phone's battery should have enough charge for the phone to turn on and find a
signal, set up voicemail, and make a call. You should fully charge the battery as soon as
possible.
3. Press to turn the phone on.

If your phone is activated, it will turn on and search for wireless service.

If your phone is not yet activated, see

Activate Your Phone

Follow the instructions below to activate your phone if it has not already been activated.
Depending on your account or how and where you purchased your phone, it may be ready to
use or you may need to activate it on your wireless account.
●
If you purchased your phone at a store, it is probably activated and ready to use.
Get Started
Activate Your Phone for more information.
3