Table of Contents
Advertisement
6. Alarm Recording
Please verify the alarm record settings prior to starting alarm recording. Please note that
alarm recording is independent of any recording modes. Alarm record starts after Alarm
Record Enable.
6.1. Record Setup
Use Direction buttons [
1.
button to display "Alarm Record Setup".
Use Left/Right buttons [
2.
Use Direction buttons [
3.
Use [-, +] button to change the value.
4.
ITEM
USE
QUALITY
RATE
AUDIO
INPUT
<Note> Press [MENU] button on each Item at first line to apply all setting for the rest channel.
Save changes and exit the menu, press [ENTER] button.
5.
Exit the menu without making changes, press [CANCEL] button.
] to select "ALARM" menu. Then, press [ENTER]
] to select on TAP menu (
] to select the Camera you wish to configure.
Enable or Disable Alarm Recording on a per camera.
Specify the record picture quality for each camera on Alarm Recording.
ULTRA
SUPER
Select recording rate of each camera when Alarm is triggered
Select audio recording: ON or OFF.
Specify the type of Alarm input Device.
ADJUSTMENT
HIGH
MIDDLE
36
LOW
DIGITAL VIDEO RECORDER
).
Advertisement
Table of Contents
