Pcm Downsampling; Dynamic Compression - Samsung BD-UP5000 User Manual

Duo hd player

Hide thumbs Also See for BD-UP5000:

Table of Contents

audJo setlJp

PCM Down Sampling

• On : Select this when the Amplifier connected to the player

is not 96KHz compatible. 96KHz signals will be down

converted to 48KHz

• Off : Select this when the Amplifier connected to the player

is 96KHz compatible. Signals will be output without any

changes.

• Even when peM Down Sampling is set to Off, some discs will only output downsampled audio through the

coaxial and optical digital outputs.

HOMI

• If your lV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), you should

set Digital Audio to PCM.

• If your lV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down

Sampling to On.

Dynamic Compression

This is only active when a Dolby Digital signal is detected.

• Off: You can enjoy the movie with the standard Dynamic

Range.

• On : When Movie soundtracks are played at low volume or

from smaller speakers. the system can apply appropriate

compression to make low-level content more intelligible and

prevent dramatic passages from getting too loud.

38_ audio setup

Table of Contents

Troubleshooting