Pcm Downsampling; Dynamic Compression - Samsung BD-P1400 User Manual

Hide thumbs Also See for BD-P1400:

Table of Contents

,system ,SetLAp

PCM Down Sampling

On : Sebct thb when the Amplifbr connected to the player

is not 96KHz compatible. 96KHz signals will be down

converted to 48KHz

,, Off : Select this when the Amplifier connected to the player

is 96KHz compatible. Signals will be output without any

changes.

_ EvenwhenPCMDownSamplingissetto Off,somediscswill onlyoutputdownsampled a udiothroughthe

coaxial a ndoptical d igitaloutputs.

HDMI

If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), you should

set Digital Audio to PCM.

If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down

Sampling to On.

Dynamic

Compression

Thb is only active when a Dolby Digital signal is detected.

,, Off : You can enjoy the movie with the standard Dynamic

Range.

On : When Movb soundtracks are played at low volume or

from smaller speakers, the system can apply appropdate

compression to make Iowqevel content more intelligible and

prevent dramatic passages from getting too loud.

system

setup

Table of Contents