Connecting To A Tv (Component); Component Video Out - Samsung BD-UP5000 User Manual

CONNECTING TO A TV (COMPONENT)
- Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate color reproduction images. Component video separates the picture
element into black and white(y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are
delivered through the audio output.)
1. Using Component video cables (not included) , connect the COMPONENT VIDEO OUT terminals on the rear of
the Duo HD player to the
COMPONENT IN
terminals of your TV.
2. Using the audio cables, connect the
AUDIO (red and white) OUT
terminals on the rear of the Duo HD player to
the
AUDIO (red and white) IN
terminals of your TV. Turn on the Duo HD player and TV.
3. Press the input selector on your TV remote control until the Component signal from the Duo HD player appears
on the TV screen.
• If you have set the remote control to properly operate with your TV (see pages 18-19), press the
TV INPUT
SEL. button on the remote control and select COMPONENT as the external source of the TV.
Audio Cable
COMPONENT IN
Green Blue Red White
• Depending on the manufacturer, the component terminals on your 1V may be marked "R-Y, B-Y, Y" or "Cr,
Cb, Y" instead of "Pr, Pb, Y". The number and position of terminals may vary depending on the 1V set. Please
refer to the user's manual of your 1V.
• You can select from avariety of resolution settings such as 1 080i, nop, 480p and 480i, depending on the
disc type. (See page 42)
• The actual resolution may differ from the setting in the SETUP menu if both Component and HDMI cables are
connected. The resolution may also be different depending on the disc. (See page 42)
• In DVD playback, if both HDMI and Component jacks are connected and you select the Component mode, the
Display Setup menu will show the output resolution as 1080p. The resolution is actually 480i.
English _23