Panini My Vision X Operator's Manual page 28

Document Feeder Options
Depending on the configuration ordered, two feeder types are available:
1. Standard Feeder Option:
Designed for single document automatic insertion.
Holds up to 30 documents for automatic batch one hand insertion (without moving the pressure
plate).
Holding up to 100 documents by pushing back the pressure plate before inserting checks into the
feeder.
2. Limited Feeder Option: Causes the automatic document feeding operation to stop, followed by a system
warning message, after 30 consecutive documents have been processed, according to the ordered
configuration. The feeder sensor must then be cleared by removing the documents from the feeder and
then repositioning and restarting the application. All other features are the same as the standard feeder.
Note: This option is reset if the feeder is emptied before the 30 document limit is met for the 30
documents limited feeder.
OPERATORMANUAL Page 26 Getting Started