Extension Plate Installation - Panini My Vision X Operator's Manual

Document Pressure Plate
Feeder Extension
Slot
Fig.7

3.2 Extension Plate Installation

The feeder extension is designed to support all documents anticipated to be processed by the My Vision
X. Markets or applications that process a large number of long documents (longer than 8 inches) may find
it necessary to apply the optional extension plate for better document support, reducing the risk of image
skewing, MICR rejects, etc. Assembly is made by sliding the extension plate, face side up, along the
bottom side of the feeder extension into the support notches until the plate snaps into place (Fig.8). The
lock tabs should securely fit into the round holes and the short and long tabs should be fully inserted into
the support notches (Fig.9).