System Q; Audio Control - Kenwood KDC-MP332 Instruction Manual

System Q

Selecting the best sound setting preset for
different types of music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
When you press the button once, the current
sound setting is displayed.
Each time you press the button, the sound
setting alternates.
Sound setting
Natural
User memory*
Rock
Pops
Easy
Top 40
Jazz
• * User memory: The values set on the <Audio
Control> (page 9).
KDC-MP332 does not have the User memory function
so the values of Bass, Middle, and Treble set in audio
control are replaced to the System Q values and
"USER" is not displayed when the System Q setting is
changed.
• Change each setting value with the <Speaker
Setting> (page 10).
First, select the speaker type with the Speaker setting.

Audio Control

1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Select the Basic Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4
Adjust the Basic Audio item
Display
Turn the [VOL] knob.
"NATURAL"
Adjustment Item
"USER"
Subwoofer level*
"ROCK"
Bass level
"POPS"
Middle level
"EASY"
Treble level
"TOP40"
Balance
"JAZZ"
Fader
Exit Audio Control mode (Volume control mode)
• *
• *
5
Exit Audio Control mode
Press any button.
Press a button other than the [VOL] knob and
[ATT] button.
Display
1,2 "SW L"
"BAS L"
"MID L"
"TRE L"
"BAL"
"FAD"
1
You can control this item when <Subwoofer
Output> (page 11) is set to "SW ON".
2 Function of the KDC-MP4032.
Range
–15 — +15
–8 — +8
–8 — +8
–8 — +8
Left 15 — Right 15
Rear 15 — Front 15
9
|
English