Ec4/Db (Sound Coordinate); Mobile Preset - Kenwood KDC-215S Instruction Manual

"TRE": Adjust the treble level.
Setting values: - 8 - + 8
"BL": Adjust the balance level.
Setting values: Left 15 - Right 15
"FD": Adjust the fader level.
Setting values: Front 15 - Rear 15

ec4/dB (Sound Coordinate)

You can recall the best audio setting preset for different types
of the music.
1
Press the AUD button to enter the Sound Coordinate mode.
2
Press a preset button (#1-5).
The preset settings of the bass and treble tones are recalled.
#1: Flat
#2: Rock
#3: Top 40
#4: Jazz
#5: Easy
3
Press the AUD button to end the sound coordinate mode.
NOTE
You can call the following settings with this function; bass center
frequency, bass level, bass quality factor, bass extension, treble
center frequency, and treble level setting.

Mobile Preset

This function allows you to adjust the setting that is recalled
with the sound coordinate system, according to types of
speakers.
1
Press the SRC button repeatedly to select the standby mode.
"OFF" is displayed when the standby mode is selected.
2
Press the AUD button to enter the mobile preset plan mode.
3
Press either the 4 or ¢ button to select the type of
speaker. The setting switches as follows.
Flat / For the OEM speaker / For 6x9 in. speaker /
For 5 in. speaker
4
Press the AUD button to end the mobile preset plan mode.
NOTE
When you change the setting of type of speaker, the bass and
treble tone settings are returned to original levels.
— 9 —
Function of the KDC-4015