Table of Contents
Advertisement
DO NOT use Tamper for longer than 45 seconds as this may cause
overheating.
DO NOT use this Tamper in any other appliance as this may
damage your Tamper.
DO NOT use a Tamper from any other appliance in this Blender as
this may damage your Blender.
8.
If this does not work, press the On/Off Switch to the Off positon
('O') to stop the motor. Once the Blades stop turning, remove the
Jar from the Blender Base and move the contents around with a
rubber spatula. Return the Jar to the Blender Base, replace the
Lid/Cap and continue blending.
9.
When blending is complete move Switch to the Off positon ('O').
WARNING: Rotating blades can cause severe injury. Wait until the
Blades have completely stopped rotating before removing or
reaching into the Jar.
10. Unplug from the wall outlet and remove the Jar by lifting up.
WARNING: The Drive Socket, Locking Nut and Blades may
become very hot after extended use. DO NOT touch. Allow to cool
down before handling or
BLENDING DRY INGREDIENTS
•
Always review the General Use instructions above.
•
DO NOT operate the Blender continuously for more than 90
seconds when processing dry ingredients.
•
When chopping nuts or other dry mixtures, ensure even chopping
by adding more than enough ingredients to cover the Blades
•
With Jar in place on Blender Base turn the Speed Control
counter-clockwise to the minimum setting. Flip the On/Off Switch
to On position ('I'). Then slowly increase the speed to the
appropriate level. Take care to not over-process.
•
For more accurate control of the blending process use the Pulse
function and stop processing when the contents have reached the
desired size or consistency.
•
NOTE: Chopping/grinding hard ingredients may scratch or mar the
inside of the Jar. This will in no way alter the performance of your
Blender. However, over time continue use in this manner may dull
the Blades or cause cracks to appear in the Jar.
•
NOTE: Some ingredients may cause discoloration of or impart odors
to the Jar that remain even after cleaning.
BLENDING HOT LIQUIDS
•
Always review all the General Use instructions above.
•
WARNING: When filling the Jar with hot liquids take care to
prevent splashing that could cause injury.
•
Allow hot liquids to stand for a few moments to permit steam to
escape before processing.
cleaning.
6
Hide quick links:
Advertisement
Table of Contents
