General Information; Connections - MacroSystem Digital Video Claro Supplementary Manual

1. General information

Congratulations on purchasing the Casablanca
Claro! We would like to thank you for placing
your trust in us and hope that the Casablanca
Claro fulfils your expectations.
These instructions describe the steps necessary
for making the cable connections and installing
and starting to use the software. Furthermore,
we shall also deal with distinctive features
relating to the Casablanca Claro here. For all
other information on such things as trackball
operation or the menu functions, please refer to
the Casablanca SMART EDIT manual.
Please do not hesitate to contact us if you have
any further questions or wish to suggest ways of
improving the product.
To contact us, please refer to the addresses and
telephone numbers printed in the Casablanca
SMART EDIT manual (Chapter 1.1). We kindly
ask you to provide your system's serial number
or your customer number whenever you contact
us.

2. Connections

Important information on connecting your
system:
1. Before connecting your Casablanca system,
please make absolutely sure you first
disconnect all the aerial, cable-TV or satellite
reception cables from the television set,
from the video recorder and from the set-top
box.
2. Next, connect up all the necessary video
and audio cable connections between your
Casablanca system and the television and
video recorder.
3. Only after you have carried out all of these
steps should you plug the electrical power
cable into the Casablanca device.
4. Finally, you should reconnect the aerial,
cable-TV or satellite reception cables back
into their original positions on the television
set, video recorder and set-top box.
These steps are intended to protect the high-
quality video inputs and outputs against
damage. The guarantee does not cover damage
resulting from these instructions being ignored.
You can now connect up your devices. In
addition to a television or computer monitor,
you also need a device from which you can
import video footage, i.e. generally your video
camera.
On the next page you will see a picture showing
the connections at the back of the Casablanca
Claro.
Setting up
You can set up your system either horizontally
(as depicted) or vertically. If you choose the
latter variant, please make sure that when you
insert a CD/DVD, you place it correctly into the
special recess so that it cannot fall out when you
close the drive!
The Casablanca Claro is supplied with four feet
located on the underside of the unit. To set up
the system vertically, please detach the feet by
moving them into a position in which you can
see the two side clips. Then carefully press on
the clips from both sides at the same time and
pull out the feet.
Afterwards, push the feet into the four special
slots on the right or left side of the unit,
depending on your preference. Then turn the
feet in the desired direction.
(1) On/off button
You can start up or shut down the system by
pressing the on/off button.
5