Dvd-Arabesk - MacroSystem Digital Video Claro Supplementary Manual

• Export to photo memory card
Use this menu to save the first frame of a scene
to a photo memory card.
The following functions are available:
- "Memory card" allows you to choose the
memory card, to which you want to export the
first picture of the scene.
- "Picture format" defines the picture format
that is to be generated. There are two options
from which to choose:
Full frame: the picture consists of two half-
frames, one after the other.
Half frame: the picture consists of a half-frame
that is doubled so that the picture height is
equivalent to that of a full frame.
- "Picture quality" defines the quality with which
the picture is to be saved, whereby users can
choose "Low", "Normal" or "High".
Note: the higher the quality, the more memory
required to store the picture on the photo
memory card!
- "Cancel" closes the menu without carrying out
a function.
- "Ok" saves the picture to the photo memory
card.
The aspect ratio will not be changed during
export.
• Import for other programs
This button allows you to import up to 10
pictures from a memory card. These pictures
will be saved in an internal archive, which other
programs can access later.
The following functions are available:
- "Memory card" allows you to choose the
memory card, from which you want to import
the first picture of the scene.
- "Image information" activates a window
showing saved information of the activated
picture displayed in the upper window.
- "Preview" opens a menu for viewing an
enlargement of the selected photo.
- "Cancel" closes the menu without carrying out
a function.
- "Ok" activates a window which allows you to
rename files and save internally. If you wish to
save more than 10 files, you will be asked to
delete one file. This window makes it possible to
choose that file and thus make way for another.
Important
Please observe the following important points:
When importing pictures, the entire memory
card is scanned for photos, which are then
displayed.
Photos are exported solely in DCF standard.
Photo Transfer requires a photo-format memory
card, Casablanca Program SmartMedia cards are
not suitable.
If a photo memory card from a specific
manufacturer is unreadable, please notify our
customer service department.
Because the aspect ratio is not changed on
export, there may be some distortion after a re-
import of such images.
• Cancel
This button closes the Photo-Transfer menu
without carrying out a function.
7. DVD Arabesk
Your system is equipped with a CD/DVD drive.
The system uses the "DVD Arabesk" software
for burning DVDs – it is supplied with your
system and is already installed.
To run the program, open the "Finish" menu on
your Casablanca. You will now see the "DVD
Arabesk 2" program in the list on the bottom
left. Select it if it has not already been marked
automatically.
After you have made the system compute
the entire video, you can click on the "Start
program" button in the area on the right to start
"DVD Arabesk 2". If at this point a notification
appears informing you that your firmware is too
old, you can obtain a firmware update free of
charge from your dealer to ensure the full range
of functions of the "DVD Arabesk 2" software is
available.
When adding the film, please make sure you
consider the differences relating to the various
quality settings. In the "Image quality" section
of the Casablanca Claro, you will also see
the "Rendering" button, which provides you
with three options, namely, "fast", "normal"
and "intensive". These options allow you to
influence the picture quality of the computed
11