Table of Contents
Advertisement
Your Cassette Tape Player
Your cassette tape player works best with tapes
that are
30 to 45 minutes
long on each side. %pes Longer than that are so thin that they may not
work well in this player.
If you look at the tape. or o n its label or box,
it
should say whether its bias,
"equalization,"
is 70
rnicrosoconds (70 p) or 120 microseconds (120
It,:).
Chrome and metal tapes are 70
p,
sec and standard iron tapes are 120
11
sec. Your tape player
will adjust automatically for either type of cassette
tape.
To Play a Cassette Tape
2. Insert the cassette through the tape door. (The TAPE indicator
in
the
display will light.)
If you hear nothing o r I~ear just
a garbled sound, the cassette
may not be
i n squarely. Press the EJCT button to remove the tape and start over. The
tape equalization is automatically sensed and set. Inserting the cassette
also activates DOLBY'? noise reduction.
3. Once the tape is playing, use the upper and lower knobs to adjust the
volume and balance, just as you do for the radio. Press thc upper knob
to change tape direction. The arrow in the display shows which
direction the tape is being played.
FWD:
Press this button to
go
fonvard rapidly to another part of the
tape.
REV: Press this button to reverse the tape.
PREV: Press this button to go back to the beginning of the track. Pressing
this button
when in the
pause period between tracks will
take
it back
to
the start of the track preceding the pause.
NEXT Press this button to advance
to the next selection.
ST/PL Press this button and the tape will stop without ejecting it and the
radio will start to play. Press
it
again and the tape will start
t o
play again.
EJCE Press this button to remove the tape.
Advertisement
Table of Contents
