Wss Technical Specifications - Nortel WLAN 2300 Series Installation And Configuration Manual

WSS technical specifications

Table 10 lists the technical specifications for Nortel WLAN—Security Switch (WSS) models 2380.
technical specifications for model 2360.
ance information, consult the regulatory section and the
guide. For specifications for the AP, see the
Table 10. 2380 Mechanical and Compliance Specifications
Specification
Size
Weight
Operating Temperature
Storage Temperature
Humidity
Power supply
Status indicators
Wired network ports
Safety and electromagnetic
compliance
Nortel WLAN—Security Switch 2300 Series Installation and Basic Configuration Guide
Table 12 lists the technical specifications for model 2350. (For detailed compli-
Translations of Important Messages
Nortel Access Point Installation
Description
Width: 44.2 cm (17.4 inches)
Depth: 46.23 cm (18.2 inches)
Height: 8.81 cm (3.47 inches)
• With one power supply: 9.75 kg (21.50 pounds)
• With two power supplies: 11.35 kg (25.00 pounds)
0° C to +50° C (32° F to 122° F)
-20° C to +70° C (-4° F to +158° F)
10% to 95% noncondensing
100-240 VAC
50 Hz to 60 Hz
Up to 350 W
8 A at 120 V
rms
peak inrush current
Hot-swappable
Load sharing with two supplies installed
Management CPU status LED
Power supply status LEDs
Port activity and link speed LEDs
(For descriptions of the LEDs, see
LEDs" on page
• Four dual-interface gigabit Ethernet ports. Each port
has a 1000BASE-TX copper interface and a GBIC slot
for insertion of a 1000BASE-SX or 1000BASE-LX
fiber-optic interface.
FCC PART 15, UL 60950
ICES PART 15, CSA 22.2 NO. 60950
EN 55022, EN 55024
CISPR 22
TUV/GS (EN 60 950)
VCCI
Guide.)
and 3.5 A at 230 V
rms rms
"2360, 2361 and 2380
20.)
Table 11 lists the
section of this installation
, with 50-A
rms
55