Table of Contents
Advertisement
■
H-Size
Switches the horizontal display range to reduce noise on
the side edge of the image.
●
For TV mode, AV and HDMI input
■
Zoom Adjustments
Adjusts the vertical position and size when aspect is set
to [Just], [Sidecut Just], [Zoom] or [Sidecut Zoom].
■
Screen Display
Turns the screen off when you select [Off].
This function is effective in reducing power consumption
when listening to the sound without watching the TV
screen.
●
Press any buttons (except Standby) to turn the screen
on.
■
Side Panel
Adjusts the brightness of the side panel.
●
The recommended setting is [High] to prevent panel
"image retention".
■
Pixel Orbiter
Selects the mode for wobbling of the image to prevent
panel "image retention".
[Auto]: Automatically works only for the appropriate
images and you rarely recognise the wobbling.
■
Scrolling Bar
Displays scrolling bar pattern to assist elimination of
panel "image retention".
●
Press the OK button to start scrolling and press any
buttons (except Standby) to exit this mode.
●
For positive effect to eliminate "image retention", it may
be necessary to display for a long time.
Copy Adjustment
Copies the selected [True Cinema] or [Custom] settings
to those of the other input.
Reset to Defaults
Resets the current Picture Viewing Mode to the default
settings.
Sound
Mode
Selects your favourite sound mode for each input.
[Standard]: Provides the suitable sound quality for all
types of scenes.
[Music]: Improves sound quality for watching music
videos, etc.
[Speech]: Improves sound quality for watching news,
drama, etc.
[User]: Adjusts the sounds manually by using the
equaliser to suit your favourite sound quality.
●
In each mode, [Bass], [Treble] and [Surround] can be
adjusted and stored.
●
For the User mode, [Equaliser] will be available in the
Sound Menu instead of [Bass] and [Treble]. Select
[Equaliser] and adjust the frequency.
●
This function is not effective for the sound from
headphones.
Bass
Adjusts level to enhance or minimise lower, deeper sound
output.
16
Treble
Adjusts level to enhance or minimise sharper, higher
sound output.
Equaliser
Adjusts the frequency level to suit your favourite sound
quality.
●
This function is available when [Mode] is set to [User].
●
Select the frequency and change the frequency level by
using the cursor button.
●
To enhance the bass sound, raise the level of the lower
frequency. To enhance the treble sound, raise the level
of the higher frequency.
●
To reset the levels of each frequency to the default
settings, select [Reset to Defaults] by using the cursor
button.
Balance
Adjusts volume level of right and left speakers.
Surround
Provides a dynamic enhancer of width to simulate
improved spatial effects.
Headphone Volume
Adjusts the volume of headphones.
Auto Gain Control
Automatically regulates large sound level differences
between channels and inputs.
Volume Correction
Adjusts the volume of each individual channel or input
mode.
Speaker Distance to Wall
Compensates for the low frequency sound due to the
distance between the speakers and the wall.
●
If the back space between the TV and wall is within
30 cm, [Up to 30cm] is recommended.
●
If the back space between the TV and wall is over
30 cm, [Over 30cm] is recommended.
NICAM
Near Instantaneous Companded Audio Multiplex
Reproduces NICAM stereo sound.
●
Set to [Off] if reception is poor (FM monaural sound)
●
For Analogue mode
Audio Preference
Selects the initial setting for audio tracks.
[Multichannel]: The priority is given to multi-channel
audio track.
[Stereo]: The priority is given to stereo (2ch) audio track.
[MPEG]: The priority is given to MPEG.
●
MPEG is an audio compression method that
compresses audio to the smaller size without any
considerable loss of audio quality.
●
For digital mode
Hide quick links:
Advertisement
Table of Contents
