Konica Minolta Magicolor 7450 II User Manual page 210

This message...
I-UNIT MISSING
CHECK X
TONER EMPTY
REPLACE
X
TONER MISSING
CHECK X
TRANS.BELT LIFE
REPLACE
TRANS.BELT
TRAYX EMPTY
"SIZE"
"MEDIA"
TRAYX PAPER ERR
"SIZE"
"MEDIA"
TRAYX SIZE ERR
ADD
"SIZE"
196
means...
The X imaging unit is
not installed, or an
unapproved imaging
unit is installed.
The X toner cartridge
is completely empty.
The X toner cartridge
is not installed, or an
unapproved toner
cartridge is installed.
The transfer belt unit
has reached the end
of its life.
The X (Tray 1, 2, 3, 4
or 5) was specified
with the printer driver
for printing, but Tray X
is empty. This mes-
sage appears when
the
PAPER MENU/
PAPER SOURCE/
TRAY CHAINING
menu is set to
OFF
The media size/type
set in the printer
driver is different from
the size/type of media
loaded. This message
appears when the
PAPER MENU/
PAPER SOURCE/
TRAY CHAINING
menu is set to
OFF
The media size set in
the printer driver is
different from the size
of media loaded.
Status, Error, and Service Messages
do this...
Install a correct KONICA
MINOLTA imaging unit.
Replace the toner car-
tridge.
Install a correct KONICA
MINOLTA toner car-
tridge.
Contact Technical Sup-
port with the error infor-
mation.
Load the correct media
into the specified tray.
.
Load the correct media
size and type.
.
Load the correct media
size into the specified
tray.