SSS Siedle LAV-30 Operating & Maintenance Instructions
SSS Siedle LAV-30 Operating & Maintenance Instructions

SSS Siedle LAV-30 Operating & Maintenance Instructions

Large area vacuum

Advertisement

Quick Links

LARGE AREA VACUUM
INTRODUCTION
This operator's book has important information for the use
and safe operation of this machine. Read this book care-
fully before starting the machine. Keep this book and tell
all operators to read the book. If you do not follow the
instructions, you can cause an injury or damage equipment,
furniture or buildings.
For additional information refer to the Triple S website
www.triple-s.com or write to:
Triple S
2 Executive Park Drive
Billerica, MA 01862
Carefully inspect all components to ensure that there is no
concealed freight damage. If such damage is discovered,
file a "CONCEALED DAMAGE REPORT" immediately
with the delivering carrier.
LAV-30
OPERATING & MAINTENANCE
READ THIS BOOK
The contents of this manual are based on the latest product
information available at the time of publication. Triple S
reserves the right to make changes or improvements to its
machines without notice.
FOR YOUR CONVENIENCE, RECORD THIS
IMPORTANT INFORMATION:
INSTRUCTIONS
MODEL_______________________________
SERIAL NUMBER______________________
PART NUMBER ________________________
DATE PURCHASED ____________________

Advertisement

Table of Contents
loading

Summary of Contents for SSS Siedle LAV-30

  • Page 1 LARGE AREA VACUUM LAV-30 OPERATING & MAINTENANCE INTRODUCTION INSTRUCTIONS READ THIS BOOK This operator’s book has important information for the use The contents of this manual are based on the latest product and safe operation of this machine. Read this book care- information available at the time of publication.
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS IN THIS BOOK BEFORE USING THIS MACHINE! If you do not understand, ask your supervisor. WARNING: To reduce the risk of fire, electric shock, or injury: 1. DO NOT USE THIS VACUUM FOR PICK UP OF WET DEBRIS. 2.
  • Page 3: Grounding Instructions

    Grounding Instructions This machine must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor and grounding plug.
  • Page 4 OPERATING PROCEDURES OPERATION WITH TOOLS WARNING! For the safe operation of this machine follow the instructions given in this booklet and the training given by your supervisor. Failure to do so can Three on-board tools are available for the vacuum: the result in personal injury and/or damage to machine and dusting tool, crevice tool and turbo tool (page 6).
  • Page 5: Maintenance

    MAINTENANCE WEEKLY: VACUUM MOTOR MAINTENANCE: 1. Inspect and clean the two vacuum inlet filters. Re- Have the vacuum motors inspected annually by a factory move the cover from the machine. The filters are now authorized service technician. If the carbon brushes are accessible (see page 10).
  • Page 6 SSS LARGE AREA VACUUM, MODEL LAV-30 Upright/Storage Position LAV-30 Large Area Vacuum #655404 Handle, Machine #653901 Cover #652302 Body, Machine #651301 Not Shown: Label, RH #655106 Label, LH #655107 Hose Assembly #654101 Clamp with Screw #S611A Cuff (2) #242402 Crevice Tool...
  • Page 7: Switch Assembly

    SWITCH ASSEMBLY Plate, Switch #656602 Switch, Rocker 20 Amp (2) Screw, #8x1/2 THP SMS (3) #911089 #W136D1 Not Shown: Lead Assembly, Switch #911211 Brush Switch Vacuum Switch COVER ASSEMBLY Bag Clamp Assembly Not Seen: Screws (2) Handle #962029 #653902 Clamps (2) #1394 Nuts (2) Bag Adapter...
  • Page 8 HANDLE & EXHAUST FILTER COMPONENTS Not Shown (at top of handle): Clamp Jacknut Handle #1394 #920026 #653901 Spring Clamp, Cable #228331 #612001 Screw Two (2) Sets: Screw #W343D Bracket, Handle #W343D #657501 Screw (2) #W516D Wiring Harness #911210 Connectors (5) Exhaust Filter #653301 #911179...
  • Page 9: Brush Assembly

    BRUSH ASSEMBLY Shoe Brush #657901 Screw, #8x1/2 THP (8) Two (2) Sets: #W136D Bearing Housing #654201 Pulley, Brush Screw, 8-32x3/8 Flat PH (2) #656901 #962105 Set Screw (2) Guard, Belt #W168D #653602 Screw (3) Bearing (2) #W136D #902035 Brush Shaft, Long #650901 Shoe End #657701...
  • Page 10: Vacuum Motor & Filters

    VACUUM MOTOR & FILTERS Screw, 10-32x1/2 Type F #962030 (230V Only) Not Shown: Washer (1) Gasket, Motor Mount #W124D #633403 Lead Assembly, Green (2) #911212 Washer (1) #W124D Vacuum Motor, 115V (2) Screw w/lock tight, Motor Mount (4) #655204 #920618 Vacuum Motor, 230V (2) Nut (4) #655205...
  • Page 11 FOOT PEDAL & VACUUM ADJUSTMENT ASSEMBLY Nut, 1/4-20 (2) #920011 Rod, Vacuum Adjustment Cotter Pin #657402 #A13507 Screws, #8x1/2 THP (4) Screws, 8-32x5/16 PHP MS(4) #W136D #W500D Plate Foot Pedal (Lever for Door) Plate, Vacuum Door #652301 #655101 #652701 Gasket, Duct Seal, Vacuum Door #653401 #657601...
  • Page 12: Limited Warranty

    SSS LARGE AREA VACUUM, MODEL LAV-30 LIMITED WARRANTY The SSS Large Area Vacuum, Model LAV-30 has been manufactured, tested and inspected in accordance with specific engineering require- ments, and is WARRANTED by the manufacturer to be free from defects in workmanship and materials.

Table of Contents