Kenwood CarPortal KOS-L432 Instruction Manual page 8

Installation
Installation using the frame (Accessory 2) (For Headrest)
Mounting and wiring this product requires skills and experience. For safety's sake, leave the mounting
and wiring work to professionals.
Before mounting the monitor to the headrest:
• Perform the required external connections first (Accessory 1).
• Using the supplied paper template (Accessory 5), mark the area to be cut out of the headrest, then
carefully cut it.
1
Connect Monitor and system cable (Accessory 1).
2
Install the monitor unit in the frame (Accessory 2).
Paper template (Accessory 5)
Removing the Monitor Unit (For Headrest)
1
Insert the removal tool (Accessory 4) deeply into the slots on each side, as shown.
Accessory 4
2
Pull the monitor unit all the way out with your hands, being careful not to drop it.
8
|
English
Headrest
Installation plate (not supplied)
Accessory 1
Screws (not supplied)
Monitor Unit
Accessory 2