Using Pistons To Control A Second Rodgers Console; Midi Local Control; Enabling Or Disabling Midi Local Control; Midi Sequencer Update - Rodgers 795 User Manual

‹ USING PISTONS TO CONTROL A SECOND RODGERS CONSOLE:
1. Connect the MIDI Sequencer Output of the master console to the Sequencer Input
of the slave console.
2. On the master console, enable piston transmission by turning the Select Knob until
the cursor is in the Send Field ("SEND") of the MIDI Stop Change menu.
3. Rotate the Alpha Dial until the Console Display reads "SEND: PST".
4. On the slave console, enable piston reception by turning the Select Knob until the
cursor is in the Receive Field ("RCV") of the MIDI Stop Change menu.
5. Rotate the Alpha Dial until the Console Display reads "RCV: PST".
When in the "OFF" position, MIDI Local Control allows the organ console to play MIDI
sounds only, disabling the organ voices. When in the "ON" position, the organ will function
normally. In the OFF position, organ voices can still be played by a sequencer or by a remote
keyboard connected to the 795 MIDI IN jack.
‹ ENABLING OR DISABLING MIDI LOCAL CONTROL:
1. Press and hold the SET piston, then turn the Select Knob clockwise (right) to

"MIDI LOCAL CONTROL".

2. Release SET.
3. Rotate the Alpha Dial to choose "ON" or "OFF". This selection is temporary. The
organ will always return to MIDI "LOCAL CONTROL ON" when the organ is
turned off.
4. Press General Cancel to exit.
MIDI Start, Stop and Continue messages generated by a sequencer are accepted by the
organ only when the MIDI Sequencer Update is enabled.
‹ ENABLING OR DISABLING MIDI SEQUENCER UPDATE:
1. Press and hold the SET piston, then turn the Select Knob clockwise (right) to

"MIDI SEQUENCER UPDATE".

2. Release SET.
3. Rotate the Alpha Dial to choose "ON" or "OFF". This selection is temporary. The
organ will always return to MIDI "SEQUENCER UPDATE ON" when the organ
is turned off.
4. Press General Cancel to exit.
Note: The organ uses the sequencer control messages to automatically record the stop
and expression status at the beginning of a sequence.
MIDI LOCAL CONTROL
MIDI SEQUENCER UPDATE
34