Husqvarna K650 Cut-n-Break Operator's Manual page 9

Regularly check that the muffler is securely attached to the
machine.
Throttle lockout
• Make sure the throttle control is locked at the idle setting
when the throttle lockout is released.
• Press the throttle lockout and make sure it returns to its
original position when you release it.
• Check that the throttle control and throttle lockout move
freely and that the return springs work properly.
• Start the power cutter and apply full throttle. Release the
throttle and check that the blades stop and remain at a
standstill. If the blades rotate when the throttle is in the idle
position you should check the carburettor's idle
adjustment. See instructions under the heading
Maintenance.
SAFETY INSTRUCTIONS
Checking the blade guards
Never use a defective guard or a guard that has not been
fitted correctly.
WARNING! Always check that the guards are
!
correctly fitted before starting the machine.
Also check that the blades are fitted
correctly and are not damaged in anyway.
Damaged blades can cause personal
injuries. See instructions under the heading
Assembly.
– 9
English