Table of Contents
Advertisement
Notation
Summary of Changes
This manual has been revised and replaces all prior editions.
Date
January 2007
February 2007
March 2008
October 2008
MVME55006E Single Board Computer Installation and Use (6806800A37E)
Change
Default setting for J102 - J110 is [1-2] (see
page
22).
Default setting for J32 is [1-2]
Default setting for J28 is [1-2}
PMC Mode for J28 and J32 is factory default
P2 PMC 2 I/O mode for J102-J110 is factory default
P2 IPMC I/O is [2-3]
See
Figure 1-3 on page 22
Updated to Emerson style standards.
Updated
Table 1-2 on page 18
defalt setting for Jumpers J28, J32 as PMC mode by
putting brackets around 1-2 on both in the Settings
column.
Description
Indicates a hazardous situation which, if not
avoided, could result in death or serious injury
Indicates a hazardous situation which, if not
avoided, may result in minor or moderate injury
Indicates a property damage message
No danger encountered. Pay attention to
important information
Figure 1-2 on
and
Figure 1-4 on page
22.
to correctly identify the
About this Manual
Replaces
6806800A37A
6806800A37B
6806800A37C
6806800A37D
13
Advertisement
Table of Contents
