Subscribe to Our Youtube Channel
Related Manuals for ATC CDA2
Summary of Contents for ATC CDA2
- Page 1 A T C C D A 2 & S I A C D U s e r O p e r a t i n g M a n u a l A C O U S T I C E N G I N E E R S...
-
Page 3: Safety Warnings
Remote Handsets Care and Maintenance instructions should be adhered to. Warranty and Contact 4. Follow instructions – all operating and other instructions should be 5 CDA2 CD player & preamplifier Description followed. Inputs Outputs 5. Water and moisture – the appliance should not be used near water,... - Page 4 The further step from electronics for active speakers will help you understand the product and to a range of stand-alone amplifier products was natural and now means that ATC to realise its full potential. We are happy to engineering is available from the recording desk or CD player output to the ears.
-
Page 5: Ge N Eri C Info Rm At I On
CDA2 and SIACD is indicated by illumination of a red indicator on the left hand side of the front The mains voltage to be used with CDA2 and SIACD is displayed on the rear panel. panel as handset commands are received. - Page 6 CDA2 & SIACD C a r e a n d M a i n t e n a n c e ATC use high technology material finishes in all products. The surfaces are durable and with a little care can be kept as good as new even under conditions of heavy use.
- Page 7 ¼” jack socket. channels. If there is any hum present on the output Selection of CDA2 inputs is achieved via an input push button mounted on the front this must be traced to its source and not suppressed panel, the selected input being shown in the display window.
- Page 8 Once connected to mains power and powered up from the rear panel mains switch, the CDA2 will assume the Input selected when the unit was last turned off. Alternative Inputs may be selected by pressing the Input push button. The Input selected will be shown in the Display window.
-
Page 9: Digital Inputs
Mains Power Voltage: 115/230V AC 50/60Hz (internally selectable). 100v AC via dedicated transformer. Mains voltage selection is to be carried out by ATC only. Maximum Power Consumption: 30VA Physical Dimensions: 90 x 445 x 330mm / 3.54 x 17.52 x 12.99"... - Page 10 1 and aux 2. The aux 2 input also features a front The SIACD integrated amplifier/DAC/CD Player panel mounted 3.5mm jack input for simple connection to portable music players. has been designed to partner ATC passive volume The front panel mounted 3.5mm jack input is a switched type, and any connections loudspeaker systems and also other manufacturer’s...
- Page 11 When headphones are connected, the signal to the power Connections to loudspeakers are made via the two pairs of proprietary ATC amplifier and pre amplifier outputs is muted. loudspeaker terminals. The positive terminal is marked with a red trim and the negative terminal is marked with a black trim.
- Page 12 SIACD CD P la yer & Integ rated A mp lif ier O p e r a t i o n – U S B A u d i o 3. The SIACD now needs to be selected as the default playback device within the The USB input provides the facility to connect desktop or laptop’s audio device settings.
- Page 13 SIACD C D Player & Int e g rat e d A mp l i fi er The SIACD USB will also work with the OSX operating system. The default audio playback device will need to be set manually. To do this, follow the steps below; 1.
-
Page 14: Integrated Amplifier
Mains Power Voltage: 115/230V AC 50/60Hz (internally selectable). 100v AC via dedicated transformer. Mains voltage selection is to be carried out by ATC only. Maximum Power Consumption: 300VA Physical Dimensions: 112 x 315 x 425mm / 4.41 x 12.40 x 16.73"... - Page 15 RPT B will be shown in the Display. On/Reset: This button is for use on other ATC equipment. A further press of the button will cancel Repeat Repeat track segment A – B: The first press of the button marks the start of functions.
- Page 16 A C O U S T I C E N G I N E E R S Loudspeaker Technology Ltd Gypsy Lane, Aston Down, Stroud, Gloucestershire GL6 8HR United Kingdom Telephone 01285 760561 Fax 01285 760683 Email: info@atc.gb.net Web: www.atcloudspeakers.co.uk...
Need help?
Do you have a question about the CDA2 and is the answer not in the manual?
Questions and answers