Auto Pre-Adjustment Mode; Auto Adjustment Mode - Kenwood DM-3090 Service Manual

1. AUTO pre-adjustment mode (Low reflection disc only)
Step No. Setting Method
Step 1 Testmode STOP state
Step 2 Press once the ENTER button.
Step 3 Press once the MD PLAY button. The slide moves to the innermost periphery, and automatic
End of adjustment
Step 4 Grating adjustment,
adjustment value output
Press once the MD STOP button. STEP 2
Step 5 Adjustment value output
Press once the MD STOP button. STEP 2 AUTO pre-adjustment menu
• : Adjustment name,

2. AUTO adjustment mode

Step No. Setting Method
Step 1 Testmode STOP state
Step 2 Press the ENTER button two times.
Step 3 Press once the MD PLAY button. The slide moves to the innermost periphery, and automatic
End of adjustment
Step 4 Adjustment value output
Press the MD PLAY button.
Press the MD STOP button.
Step 5 Continuous playback (pit section)
Continuous playback (groove section)
Step 6 Press the DISPLAY button.
Press the MD STOP button.
Step 7 Adjustment value output
Press the MD STOP button.
• : Adjustment name,
ADJUSTMENT
AUTO pre-adjustment menu
pre-adjustment is started.
• During automatic adjustment
HAo→RFg→SAg→SBg→PTG→PCH→GTG→GCH→RCG→
SEG→RFG→SAG→HAO→HEO→TCO→LAO
If adjustment is OK, Step 4.
If adjustment is NG, Step 5.
: Address
AUTO adjustment menu
adjustment is started.
• In case of high reflection disc
PEG→HAG
•In case of low reflection disc
PEG→LAG→GCG→GEG→LAG
If adjustment is OK, Step 4.
If adjustment is NG, Step 7.
STEP 5
STEP 2
Continuous playback (groove section)
STEP 2 AUTO adjustment menu
STEP 2 AUTO adjustment menu
: Measurement value,
Remarks
changes as follows.
Remarks
changes as follows.
changes as follows.
: Address
DM-3090
Display
[ t s m e ]
[ A U T O ]
[ : _ _ _ _ _ _ ]
[ _ C O M P L E T E _ ]
[ AUTO ]
Display
[ t s m e ]
[ A U T O _ A J S T _ ]
[ : _ _ _ _ _ _ ]
[ _ C O M P L E T E _ ]
[ s c ]
[ a c ]
[ a a ]
[ C a n ' t _ A D J . ]
25