C. Program The Timer - Kenmore microMAX 625.348460 Owner's Manual

SECTION 1
1C.
2.
SET WATER HARDNESS NUMBER:
NOTE:
example, assume your water is 15 gpg hard and
contains 2 ppm iron. Add 5 to the hardness
number for each 1 ppm of iron. In this example,
you would use 25 for your hardness number.
2 ppm iron x 5 = 10 +10
(times)
NOTE:
3.
SET RECHARGE (REGENERATION) TIME:
IF YOU NEED HELP PROGRAMMING THE TIMER, CALL TOLL FREE, NUMBER
1–800–426–9345. SEE PAGE 10 FOR OTHER FACE PLATE TIMER FEATURES.
IMPORTANT: Salt is used to recharge the mineral in your water softener...see page 9. Before
shipping, the mineral is factory pretreated with salt. Before using water from this softener , be
sure to do the sanitizing procedures and start a recharge (page 8), to flush salt from it.
PROGRAM THE TIMER
15 gpg hardness
25 HARDNESS NUMBER
WATER SOFTENER START-UP
For
NOTE:
Press the SELECT button once again,
4.
SET ''CLEAN'' FEATURE:
J
J
7