DeWalt DWD450 Instruction Manual page 7

FIG. 1
DWD450
A
B
E
F
DWD460
A
B
E
F
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of injury, turn unit off
and disconnect it from power source before installing and
removing accessories, before adjusting or when making
repairs. An accidental start-up can cause injury.
Torque
C
WARNING: This is a high-torque drill. To reduce the risk of serious
personal injury, ALWAYS hold tool firmly with both hands in the
proper position for operation as shown.
Torque is the twisting action the drill produces in regards to the rotating
bit. As the drill bit meets resistance in the material being drilled, the
D
motor responds by adjusting the output torque to meet the requirement
up to the maximum capacity of the motor and gear system.
BRACING THE TOOL (FIG. 2, 3)
WARNING: To reduce the risk of serious personal injury, ALWAYS
use proper hand position as shown in Figure 2.
G
FIG. 2
C
WARNING: To reduce the risk of serious personal injury, ALWAYS
hold or brace the tool securely in anticipation of a sudden reaction.
D
With hands in the proper hand position, brace the tool as shown in
H
Figure 3.
5