How To Change Color Panels - GE GSD950 Use And Care Manual

HOW TO CHANGE COLOR PANELS

match or blend with your new colors by flipping them over. Each side of
your own choice.
How to Change the Door Panel:
1. Take out trim screws on either side of the
dishwasher door. Remove the side trim.
2. Slide the door panel out.
(Careful—edges may be sharp.)
3. Turn the door panel around and put the color you
want in front.
4. Replace the door panel, side trim and screws.
How to Change the Lower Panel:
Top
Trim
Attachment Screws
Wood Panel fiim Kit
Wood panel trim kits, contain trim and
instructions for adding a decorative wood door
panel and lower access panel no thicker than 1/4"
to match kitchen cabinets.
Specify the trim color of your choice from the
following options:
The kit is available for $5.00 (shipping and handling).
Make check payable to the General Electric Co.
12
c
1. Remove the panel attachment screws.
2. Remove the entire access assembly by lifting it up
and over the retaining tabs.
3. Take out the top trim screws and remove the
top trim.
4. Slide the color panel(s) up and out and put the color
you want in front.
5. Replace the top trim and screws.
6. Replace the entire access assembly by hanging
it back on the retaining tabs. Hold the access
assembly in place and replace attachment screws.
Order a Trim Kit from:
GE Appliances
c/o Dri-View Manufacturing
4706 Allmond Ave.
Louisville, KY 40209
NOTE: Do not operate
dishwasher while changing
panels or when lower access
panel is removed.