How To Change Color Panels - GE GSD750 Use And Care Manual

HOW TO CHANGE COLOR PANELS

you are redecorating, you can change your dishwasher's front panels to
panel is a different color, You may also paint a panel with a color of
your own choice.
How to Change the Door Panel:
1.
Take out trim screws on either side of the
dishwasher door. Remove the side trim.
2. Slide the door panel out.
(Careful—edges may be sharp.)
3. Turn the door panel around and put
want in front.
4. Replace the door panel, side trim and screws.
How to Change the Lower Panel:
Top
Trim
Attachment Screws
Wood Panel Trim Kits
Wood panel trim kits, contain trim and
instructions for adding a decorative wood door
to match kitchen cabinets.
Specify the trim color of your choice from the
following options:
The kit is available for $5.00 (shipping and handling).
Make check payable to the General Electric Co.
12
the color you
'
(Available for both models)
1. Remove the panel attachment screws.
2. Remove the entire access assembly by lifting it up
and over the retaining tabs.
3. Take out the top trim screws and remove the
top trim.
4. Slide the color panel(s) up and out and put the color
you want in front.
5. Replace the top trim and screws.
6. Replace the entire access assembly by hanging it
back on the retaining tabs. While holding access
panel in place, replace attachment screws.
If you have redecorated, and the color panels in
your dishwasher do not blend with your new color
scheme you may order one additional color panel
without charge.
Specify the color panel GPF26 Harvest/Black.
Order a Trim Kit or a Color Panel from:
GE Appliances
c/o Dri-View Manufacturing
4706 Allmond Ave.
Louisville, KY 40209
NOTE: Do not operate
dishwasher while changing
panels or when lower access
panel is removed.