Grundig Scenos UMS 6400 DVD Manual page 25

SETTINGS
- - AUDIO SETUP - -
AUDIO OUT
– – FULL
DUAL MONO – –
s
– – 6/8
DYNAMIC
– –
PRO LOGIC
– – 4/8
PRO LOGIC II MODE
– –
PRO LOGIC II CNTL
– – 2/8
– –
\
MAIN PAGE
– – OFF
DYNAMIC RNG COMPRESSION 6/8
- - AUDIO SETUP - -
AUDIO OUT
DUAL MONO
DYNAMIC
s
PRO LOGIC OFF
PRO LOGIC II MODE ON
PRO LOGIC II CNTL AUTO
\
MAIN PAGE
PROLOGIC OUTPUT OFF
- - AUDIO SETUP - -
AUDIO OUT
DUAL MONO
DYNAMIC
PRO LOGIC PRO LOGIC
s
PRO LOGIC II MODE VITUAL
PRO LOGIC II CNTL
MUSIC
MOVIE
\
MAIN PAGE
MATRIX
MUSIC
PRO LOGIC II CNTL
s
-3
DIMENSION
PANORAMA -2
CENTER WIDTH -1
0
AUDIO SETUP 1
2
3
DIMENSION
____________________________________________________________________________________
2 Select »DYNAMIC« with » « or » «.
3 Use » « to move to the right column.
– »OFF«, »2/8« ... »6/8«, »FULL«. »OFF« (default setting) means uncom-
pressed dynamics (for example, during the day), »FULL« means com-
pressed dynamics (for example, late at night).
4
Select the required setting by pressing » « or » « and confirm with
»DEMO/OK«.
Setting the surround mode
Depending on the input signal, you can choose between different surround
modes (Stereo, Pro Logic, Pro Logic II Virtual, Pro Logic II Music, Pro Logic II
Movie, Pro Logic II Matrix). For digital multi-channel audio signals (5.1) (Dolby
Digital, DTS), the optimum setting is made automatically, depending on the
loudspeakers connected. For 2-channel audio signals, the following settings are
possible:
1
Select »AUDIO SETUP« with » « or » « and confirm with
»DEMO/OK«.
2 Select »PRO LOGIC« with » « or » «.
3 Use » « to move to the right column.
– »OFF«: Pro Logic is deactivated. »OFF« is the default value.
– »ON«: setting for VCD/S-VCD mode.
– »AUTO«: setting for general disc operation.
4
Select the required setting by pressing » « or » « and confirm with
»DEMO/OK«.
5
Make further settings, to do this use » « or » « to select »PRO LOGIC II
MODE« and switch to the right column with » «.
– Settings: »PRO LOGIC«, »VIRTUAL«, »MUSIC«, »MOVIE« or »MATRIX«.
6
If »MUSIC« is set, use » « or » « to select »PRO LOGIC II CNTL« and
confirm with »DEMO/OK«.
7
Using » « or » «, select »DIMENSION«, »PANORAMA« and »CENTER
WIDTH« in that order and make the appropriate settings.
– For »DIMENSION«: »-3« to »3« (moves the sound field more to the front
or to the back).
– For »PANORAMA«: »ON« or »OFF« (»ON« widens the scope of the front
loudspeakers).
– For »CENTER WIDTH«: »0« to »7« (adjustment for the central sound
playback).
8
Select the required setting by pressing » « or » « and confirm with
»DEMO/OK«.
25