Chapter 5. Using The Online And Standalone Diagnostics; Online And Standalone Diagnostics Operating Considerations - IBM eserver pSeries 690 User Manual

Chapter 5. Using the Online and Standalone Diagnostics

The diagnostics consist of online diagnostics and standalone diagnostics.
Attention:
online diagnostics on that partition. If the AIX operating system is not installed, use the
standalone diagnostic procedures.
Online diagnostics, when they are installed, reside with AIX in the file system. They can
be booted:
v In single user mode (referred to as service mode )
v To run in maintenance mode (referred to as maintenance mode )
v To run concurrently with other applications (referred to as concurrent mode )
Standalone diagnostics must be booted before they can be run. If booted, the
diagnostics have no access to the AIX error log or the AIX configuration data.

Online and Standalone Diagnostics Operating Considerations

Note: When possible, run online diagnostics in service mode. Online diagnostics
Consider the following items before using the diagnostics:
v Standalone diagnostics can run on systems configured for either a full (or single)
system partition or a multiple partitioned system. When running in a partitioned
system, the device from which you are booting standalone diagnostics must be made
available to the partition dedicated to running standalone diagnostics. This may
require moving the device from the partition that currently contains the boot device
(for example, the CD-ROM or network adapter connected to the NIM server that has
a standalone diagnostic image) to the partition used to run standalone diagnostics. If
you move devices, reboot both partitions. For more information, see "Standalone
Diagnostic Operation" on page 88.
v When diagnostics are installed, the device support for some devices might not get
installed. If this is the case, that device does not display in the diagnostic test list
when running disk-based diagnostics.
v When running diagnostics in a partitioned system, diagnostics will work only with the
resources that were assigned to that partition. You must run diagnostics in the
partition containing the resource that you want to test.
The AIX operating system must be installed in a partition in order to run
perform additional functions compared to standalone diagnostics. Running online
diagnostics in service mode ensures that the error state of the system that has
been captured in NVRAM is available for your use in analyzing the problem. The
AIX error log and certain SMIT functions are only available when diagnostics are
run from the disk drive.
83