Table of Contents
Advertisement
STARTUP
1.
First start your PC and then turn on your monitor using the power switch (① in fig. 4).
The status indicator (① in fig. 4) should light up green.
Adjust the image to meet your requirements (see the following sections "Basic
2.
Setup" and "Image settings using the OSD menu").
3.
If there is no image displayed on the monitor, consult the section
"Troubleshooting".
BASIC SETUP
・ Automatic Image Adjustment
You can adjust the image settings (such as brightness, contrast, image position,
phase, etc.) manually or by using the LCD monitor's automatic image adjustment
feature. This will adjust the image parameters to their optimal settings for the
current graphics mode. Press AUTO (① in fig. 4) to launch the automatic
adjustment. The process will take a short while until completed.
・ Setting the volume directly
You can adjust the speaker volume of the integrated audio system directly by
▶
pressing the
buttons (④ in fig. 4 ) while the OSD menu is inactive. Next
▶
press the
button to increase the volume or the
・ Shortcut for adjusting brightness and contrast
You can adjust brightness and contrast directly by pressing the
fig. 4) while the OSD menu is inactive. Next, press the
fig. 4) to adjust the brightness or the
OSD contrast.
◀
◀
or
◀
▶
or
buttons (④and⑤ in fig. 4) while the
4
button to decrease it.
◀
buttons (④in
▶
buttons (④and⑤ in
Advertisement
Table of Contents
