Download Print this page

Advertisement

Quick Links

12
Declaration of EC Conformity
In accordance with European
commu-nity
directives,
quality
certificates have been applied. All
materials have been adapted and
technical reports are available at
our offices.
04/108/EC on the approximation
of the laws of the Member
States relating to electromagnetic
compatibility.
98/37/EC
amending
Directive
89/392/EC on the approximation
of the laws of the Member States
relating to machinery.
REG. 1935/2004 amending Direc-
tive 89/109/CE on the approxima-
tion of the laws of the Member
States relating to material and ob-
jects destinated to make contact
with nutritional products.
03/108/EC amending Directive
2002/96/EC on waste electrical
and electronic equipment (WEEE).
06/95/EC of 12/12/2006 on the
harmonization of the laws of
Member States relating to electrical
equipment designed for use within
certain voltage limits.
02/96/EC of 27/01/2003 on the
approximation of the laws of the
Member States on waste electrical
and electronic equipment (WEEE).
Environment
Do not throw the
appliance away with
the normal household
waste; hand it in at an
official recycling collection point.
By doing this, you will help to pre-
serve the environment.
The Legal Representative
K-6
K-6
K-6
K-8
K-10
K-10
Instructions Manual
K-6 / K-6 Silenzio / K-6 Professional Barista
K-8 Silenzio / K-10 Conic / K-10 Conic WBC
molinos de café
moulins à café
kaffeemühlen
macinadosatori
Silenzio
Professional Barista
Silenzio
Conic
Conic WBC
moinhos de café
к о ф е м о л к и
μαδοι αδσησ καε
coffee grinders

Advertisement

loading

Summary of Contents for La Marzocco K-6 Silenzio

  • Page 1 03/108/EC amending Directive 2002/96/EC on waste electrical and electronic equipment (WEEE). Instructions Manual K-6 / K-6 Silenzio / K-6 Professional Barista K-8 Silenzio / K-10 Conic / K-10 Conic WBC moinhos de café molinos de café к о ф е м о л к и...
  • Page 2: Table Of Contents

    2 - Instructions manual CYCLE 3 - Identification WORK STOP K-6 / K-6 Sil / K-6 Pro / K-8 Sil 10 min. 5 min. 4 - Technical characteristics K-10 Conic / K-10 Conic WBC 3 min.
  • Page 3: Identification

    MODEL SERIAL NUMBER K-6 / K-6 Sil K-6 Pro K-8 Silenzio K-10 Conic K-10 WBC MODEL ELECTRICAL DATA...
  • Page 4: External Components

    • To disconnect the grinder, always pull out the plug and never collection tray the electrical cable, to avoid the possibility of a short circuit. * The K-10 WBC and K-6 Professional models come with a special competition doser and do not incorporate the built-in tamper.
  • Page 5 Height (in / mm.) Width (in / mm.) Depth (in / mm.) K-6 / K-6 Sil / K-6 Pro / K-8 Sil K-10 Conic 31.5 / 800 12.1 / 310...
  • Page 6 For security reasons, the regulator (6) is limited to a single turn. Coffee beans In the Stepped models, the grinding positions are set by the place- ment of the holes shown in Fig. 5. Using these holes, select the Anchored grind point you desire.
  • Page 7: Regulation

    Operation 7.2. Regulating the coffee servings 8.1. Use The dispensers are factory adjusted to serve an amount of To turn the machine on and off use the On-Off switch (14). The approximately 7 g. of ground coffee, but this quantity can be machine will start to grind the coffee.
  • Page 8: Operation

    Fig. 9. When Loosen by hand the setting roller (5) and, with the help of a flat- using the WBC or K-6 Professional models, we recommend the head screwdriver, unthread the hopper safety screw. Remove the use of a manual tamper.
  • Page 9 300 Kg/660 Lb of coffee with the K-6 & K-8 models and 1500 substances. Not following these instructions could affect the Kg/3300 Lb with the conical models.
  • Page 10: Maintenance

    Safety measures put the regulator back in place, turning it counter-clockwise as in NOTE: The manufacturer cannot accept responsibility for any Fig. 11 until the burrs touch and replace the 3 screws. damage caused by improper use of the machine or failure to respect the safety measures indicated below.