Switching On And Off; Switching Off - Black & Decker KW750 User Manual

ENGLISH
Use
Warning! Let the tool work at its own pace. Do
not overload.
•
Adjust the depth of cut.
•
If necessary, fit and adjust the parallel fence.

Switching on and off

Switching on
•
Keep the lock-off button (2) depressed and
press the on/off switch (1).
•
Release the lock-off button.

Switching off

•
Release the on/off switch.
Planing
•
Hold the tool with the nose piece of the shoe
resting on top of the workpiece surface.
•
Switch the tool on.
•
Move the tool steadily forward to perform the
cutting stroke.
•
Switch the tool off after the stroke has been
completed.
Rebating (fig. F)
•
Fit and adjust the parallel fence.
•
Proceed as for planing.
Chamfering edges (fig. G)
The V-groove in the nose piece of the shoe
enables you to chamfer edges at 45°, 30° and
15° angles.
•
Hold the tool at an angle with the desired
groove (20) around the edge of the
workpiece and perform the cutting stroke.
10
Parking rest (fig. H)
Your planer is equipped with a parking rest (21)
that automatically lowers into place when the tool
is lifted from the work surface. When planing, the
parking foot raises as the tool is pushed forward.
When the parking foot is lowered, the planer can
set on the work surface without the blade
touching.
Hints for optimum use
•
Move the tool along the grain of the wood.
•
If the grain is cross or curly, or if the
workpiece material is a hard type of wood,
adjust the depth of cut to take only a very
thin shaving at each pass and take several
passes to achieve the desired result.
•
To keep the tool in a straight line, press down
the front of the tool at the start, and press
down the back of the tool at the end of the
cutting stroke.
Accessories
The performance of your tool depends on the
accessory used. Black & Decker and Piranha
accessories are engineered to high quality
standards and designed to enhance the
performance of your tool. By using these
accessories you will get the very best from your
tool.
The following types of cutting blades can be
obtained from your local retailer:
- Tungsten carbide tipped reversible cutting
blades (part no. X35007, supplied per pair)
- High-speed steel reversible cutting blades
(part no. X24192-XJ11, supplied per pair)