Standard Specifications - IBM BladeCenter HS22V Product Manual

Standard specifications

The following table lists the standard specifications.
Table 1. Standard specifications
Components Specification
Form factor Single-wide (30 mm)
Processor (max) Intel Xeon 5500 series processors
Intel Xeon 5600 series processors
Number of 1 standard / 2 maximum
processors
Memory DIMM 18x DDR-3 VLP DIMM slots
sockets
Maximum Models with Xeon 5600 processors: 288 GB using 16 GB DIMMs (144 GB per processor)
memory
Models with Xeon 5500 processors: 144 GB using 8 GB DIMMs (72 GB per processor)
Expansion slots One CIOv slot: 2 ports
One CFFh slot: 4 ports
Disk bays Two non-hot-swap bays supporting two solid-state drives
Maximum Up to 100 GB total internal storage
internal storage
Network 2x 1Gb Ethernet using a Broadcom 5709S onboard NIC
interface
Some models also include a 2-port 10Gb controller installed in the CFFh slot
Some models also include a 2-port 8Gb Fibre Channel controller installed in the CIOv slot
Hot-swap None
components
RAID support RAID-0, -1 and -1E (optional RAID-5 with battery-backed cache)
Systems Unified Extensible Firmware Interface (UEFI), IBM Integrated Management Module (IMM),
management Predictive Failure Analysis, optional embedded hypervisor for virtualization, IBM Systems
Director Active Energy Manager
ServerGuide
Security Trusted Platform Module (TPM), Power-on password, administrator password, unattended
boot, selectable boot, unattended start mode
Operating Microsoft Windows, Red Hat Enterprise Linux, SUSE Linux Enterprise, VMware, Oracle Solaris
systems
supported
Limited warranty Three-year customer replaceable unit, and onsite and offsite limited warranty
The IBM BladeCenter HS22V is shipped with the following items:
Documentation CD

Environmental Notices CD

Statement of Limited Warranty

Important Notices

Technical Note Flyer

IBM BladeCenter HS22V
™
, light path diagnostics, IBM Systems Director, and IBM
3