Advertisement
Your heaters
Your heating system comprises of two types of heater the "DuoHeat" and the "Panel Heater"
all linked to a "Central Wall Controller".
Duo Heater
• The DuoHeat provides the majority of the heat you will
require.
• Therefore it may remain hot most of the day from heat
stored when cheap electricity is available.
• The heater intelligently selected the cheapest energy
available, combining both low cost and standard rate
electricity.
• To control the heaters' temperature press the illuminated
panel – for less heat & + for more.
• Child lock function – this disables the controls to prevent
tampering. Press and hold both – and + buttons for 5
seconds to activate, repeat to cancel (the wall controller
overrides the control on the heater – it is only adjustable
when in the Comfort Mode).
EPX Heater
• The Panel heater provides rapid heating to occasional use
rooms like bedrooms
• The heater automatically adjusts to maintain desired
temperatures in the room when in the Comfort Mode.
• To control the heaters' temperature slide the control right
for more heat and left for less heat (The wall controller
overrides the control on the heater it should only be adjusted
when in the Comfort Mode).
Wall controller
• The wall Controller provides you with the flexibility to
control the whole heating system from one point
• Should you wish to override the system from the preset
times turn the Mode Selector Knob to select the desired
mode.
• If you are absent for long periods of time i.e a short break
or holiday there is a simple Holiday Mode function. This
function switches the heating system in to a frost protection
mode. In this mode the dwelling is continually monitored,
should the temperature drop below the minimum set level
the system will respond to minimize any potential damage.
To set refer to the instruction on the back page.
• Should you wish to change the pre-set times refer to the
instructions on the back page.
Advertisement
