Additional Safety Precautions - Shindaiwa 300S Owner's/Operator's Manual

Additional Safety Precautions

NOTE:
These safety precautions are
intended primarily for consumers or
occasional users. When using this
chain saw for logging purposes, refer
to: CFR Section 1910. 266 (5); 2.5.1
of the American National Safety
Standard; Requirements for Pulp-
wood Logging ANSI 03.1-1978; and
any applicable state safety codes.
■ Never operate this chain saw with
one hand! One-handed operation
could cause you to lose control,
causing serious injury to yourself
or others! A chain saw is intended
for two-handed use.
■ Wear safety footwear, snug-fitting
clothing, protective gloves, and
eye, hearing, and head-protection
devices while working with this
chain saw.
■ Do not allow other persons to be
near the chain saw when starting
or running the chain saw. Keep
bystanders and animals out of the
work area.
6
WARNING!
■ Never allow young children or any
person unfamiliar with chain saws
to operate this saw!
■ Clear the work area before using
the saw. Never start cutting until
you are sure you have a secure
footing and have planned a retreat
path from the falling tree.
■ Before starting the saw engine,
make sure nothing is touching the
saw chain.
■ Keep all parts of your body away
from the saw chain whenever the
engine is running!
■ Stop the engine before carrying
the saw. Carry the saw with the
engine stopped, the guide bar and
saw chain pointing to the rear, and
the engine muffler away from your
body.
■ Never operate this chain saw if
you are fatigued.
■ Stop the engine before setting the
chain saw down.