1. Manuals
  2. Brands
  3. Unicorn Manuals
  4. Motherboard
  5. ENDAT-5701
  6. User manual

Unicorn ENDAT-5701 User Manual

All-in-one motherboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Enlarged version
II
The ENDAT-5701/5901 All-In-One motherboard
Copyright Notice
ENDAT-5701/5901
The content of this manual has been checked for accuracy. The manufacturer
assumes no responsibility for any inaccuracies that may be contained in this
manual. The manufacturer reserves the right to make improvements or
modification to the this document and/or the product at any time without prior
All-In-One motherboard
notice. No part of this document may be reproduced, transmitted, photocopied or
translated into any language, in any form or by any means, electronic, mechanical,
magnetic, optical or chemical, without the prior written permission of the
manufacturer.
VIA is registered trademark of VIA Technology Incorporation
User's Manual
VIA Apollo MVP4 may only be used to identify products of VIA Technology
VT82C868A may only be used to identify products of VIA Technology
Realtek is registered trademark of Realtek Technologies Inc.
Rev. 3x
Multiscan is a trademark of Sony Corp of America
IBM, EGA, VGA, PC/XT, PC/AT, OS/2 and PS/2 are registered trademarks of
International Business Machines Corporation
Intel is a registered trademark of Intel Corporation
Plug and Play is registered trademarks of Intel Corporation
Microsoft, Windows and MS-DOS are trademarks of Microsoft Corporation
Award is a trademark of Award Software Inc.
PCI is a registered trademark of PCI Special Interest Group
Other product names mentioned herein are used for identification purpose only
and may be trademarks and/or registered trademarks of their respective
companies.
Installation Notice
The manufacturer recommends using a grounded plug to ensure proper
motherboard operation. Care should be used in proper conjunction with a
grounded power receptacle to avoid possible electrical shock. All integrated
circuits on this motherboard are sensitive to static electricity. To avoid damaging
For 5701 PCB ver.1F or later
components from electrostatic discharge, please do not remove the board from the
For 5901 PCB ver.2xor later
anti-static packing before discharging any static electricity to your body, by
wearing a wrist-grounding strap. The manufacturer is not responsible for any
damage to the motherboard due to improper operation.
4/30/2002

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ENDAT-5701 and is the answer not in the manual?

Questions and answers

Related Manuals for Unicorn ENDAT-5701

Summary of Contents for Unicorn ENDAT-5701

  • Page 1 The ENDAT-5701/5901 All-In-One motherboard Copyright Notice ENDAT-5701/5901 The content of this manual has been checked for accuracy. The manufacturer assumes no responsibility for any inaccuracies that may be contained in this manual. The manufacturer reserves the right to make improvements or...

  • Page 2: Table Of Contents

    Optional Support TFT/ DSTN LCD CHAPTER 2. SETTING UP THE MOTHERBOARD....7 LAN Chipset Realtek 8139A/B/C 10BaseT/100 BaseT(Boot ROM Optional) 2-1. JUMPERS AND CONNECTORS (ENDAT-5701) ......... 7 Audio Feature (Optional) via AV Card kit 2-2. JUMPERS AND CONNECTORS (ENDAT-5901) ......16...
  • Page 3 User’s Manual CHPATER 4. VGA, FLAT PANEL, DOC, IDE FEATURE ..41 4-1. AGP-BUS VGA FEATURE ..............41 4-2. LCD FLAT PANEL FEATURE ............. 42 4-3. PCI BUS AUDIO ADAPTER FEATURE..........43 4-4. DISKONCHIP FEATURE..............44 4-5. DRIVER UTILITY INSTALLATION GUIDE ........45 CHPATER 5.

  • Page 4: Chapter 1. Introduction

    8139xx LAN chipset with RJ45 Jack for 10BaseT/100BaseT. Our board offers the • Supports Ultra DMA33/66 EIDE highest performance PC specifications in the industry. The ENDAT-5701 and • Onboard support for 4 high-speed UARTS (W/16550 FIFO) and multi-mode ENDAT-5901 runs with the Intel Pentium P54C/P55C, AMD K5/K6, K6-2/K6-3, IDT C6, Rise MP6 or IBM/Cyrix 6x86 CPU upto 550MHz.

  • Page 5: Unpacking

    User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses 1-2. Unpacking 1-4. Motherboard Layout (ENDAT-5701) The motherboard comes securely packaged in a sturdy cardboard shipping carton. In addition to the User's Manual, the motherboard package includes the following items: • ENDAT-5701/ENDAT-5901 All-In-One Motherboard •...

  • Page 6: Motherboard Layout (Endat-5901)

    User’s Manual 1-5. Motherboard Layout (ENDAT-5901)

  • Page 7: Chapter 2. Setting Up The Motherboard

    ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses Function Jumpers/Connectors Chapter 2. Setting up the Motherboard RS232/RS422/RS485 Selector (COM2) JP7, JP8, JP9, JP10 TTL Output Pin Header (For COM2) TTLOut1 This chapter describes how to set up the motherboard and get ready for operation.
  • Page 8 User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses above for your system. The wrong setting may cause system damaged ENDAT-5701 CPU Vcore Setting: Switch2 (S2: SW1-SW5) the CPU or system not working. VCORE=3.5V VCORE=3.4V For ENDAT-5901 Rev.1D or later. S1 S2 S3 S4 S5 S1 S2 S3 S4 S5 For ENDAT-5701 Rev.1F or later.
  • Page 9 User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses ENDAT-5701 CPU CLOCK Setting: Switch1(S1:SW1-SW4) JP1: CMOS Data Clear: Pin 1-2 * Normal CPU = 60MHz CPU = 66.8MHz Pin 2-3 Clear CMOS Data PCI CLK=30MHz PCI CLK=33.4MHz JP2: DiskOnChip Memory Address Selector...
  • Page 10 User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses J3: Case Panel connection JP16: On-board Expansion SLOT INT Selector Pin No. Description INT Routing JP16 1, 2 IDE 1 LED Pin 1 = - Pin 2 = + A, B, C, D...

  • Page 11: Jumpers And Connectors (Endat-5901)

    User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses 18Bit TFT DSTN / 16Bit DSTN LCD Panel Mapping 2-2. Jumpers and Connectors (ENDAT-5901) 18Bit 16Bit 18Bit / 18+18 Pin No. Function Jumpers/Connectors DSTN CPU: CPU Clock Frequency Switch 1 (S1: SW1-SW4) N.C.
  • Page 12 User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses Function Jumpers/Connectors ENDAT-5901 CPU Vcore Setting: Switch 2 (S2: SW1-SW5) IDE 2 Connector VCORE=3.5V VCORE=3.4V FDD Connector S1 S2 S3 S4 S5 S1 S2 S3 S4 S5 Header for Case Panel ON ON ON ON OFF...
  • Page 13 User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses above for your system. The wrong setting may cause CPU damage or ENDAT-5901 CPU CLOCK Setting: Switch1(S1:SW1-SW4) system not working. CPU = 60MHz CPU = 66.8MHz For ENDAT-5901 Rev.1D or later. PCI CLK=30MHz PCI CLK=33.4MHz...
  • Page 14 User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses JP1, JP2, JP3: RS232 / 485 Selector for COM2 FAN1, FAN2: CPU / 2ND Cooling Fan Connector Pin No. Function RS-232* Open 1-2, 4-5, 7-8, 10-11 Sensor Pin. RS-485 Close 2-3, 5-6, 8-9, 11-12 +12V Make sure the port mode is set up correctly before installing any peripherals.
  • Page 15 User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses J4: Case Panel connection 18Bit TFT / 16Bit DSTN LCD Panel Mapping Pin No. Description 18Bit 16Bit 18Bit / 18+18 Pin No. 1, 2 IDE 1 LED Pin 1 = - Pin 2 = +...

  • Page 16: Installing Memory

    Both ISA and PCI expansion cards may need to use IRQ. Cards installed in the ISA Expansion Bus has the first priority to use the available system IRQs. Any The ENDAT-5701 / ENDAT-5901 is using built-in AGP VGA controller with share remaining IRQ then, may be assigned to this PCI Bus. Microsoft's Diagnostic memory architecture (SMA) - AGP mode with 4MB/8MB or PCI mode with (MSD.EXE) utility included in the Windows directory can be used to see their map.

  • Page 17: Assigning Dma Channels For Isa Cards

    User’s Manual Status Assignment Used Floppy Disk Used LPT1 Used Used Redirected IRQ2 / SoundBlaster Used COM4 (Optional) Used LAN Adapter (on board) Used PS/2 Mouse Used Coprocessor Used Hard Disk (IDE 1) Used Reserved (IDE 2) 2-7. Assigning DMA Channels for ISA Cards Since ISA cards, both Legacy and PnP may also need to use a DMA (direct memory access) channel, DMA assignments for this motherboard are handled the same way as the IRQ assignment process described above.

  • Page 18: Chapter 3. Award Bios Setup

    ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses 3-2. Description of the BIOS Setup Option Chapter 3. AWARD BIOS SETUP Please make clear the means of those option parameters. Improper settings will cause the system to hang up or perform poorly. Most items are clearly understood Use the CMOS setup program to modify the system parameters to reflect the from the screen prompt.

  • Page 19: Details Of Chipset Feature Setup

    User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses 3-4. Details of the Chipset Feature Setup Video BIOS Cacheable When enabled, the Video BIOS cache will cause access to video BIOS addressed at ROM PCI/ISA BIOS (2A5LHU4A) C0000H to C7FFFH to be cached, if the cache controller is also enabled.

  • Page 20: Details Of Power Management Setup

    User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses Doze Mode = 1 min., Standby Mode = 1 min., Suspend Mode = 3-5. Details of Power Management Setup 1 min., And HDD power down = 1 min. ROM PCI/ISA BIOS (2A5LHU4A) User Defined Allows you to set each mode individually.

  • Page 21: Doze Mode

    User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses Doze Mode 3-6. PCI Configuration Setup When enabled and after the “Set time system inactivity”, the CPU clock will run at This section describes the configuration of the PCI bus system. PCI is a system that a slower speed while all other devices operate at full speed.

  • Page 22: System Environment

    User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses Reset Configuration Data 3-8. Integrated Peripherals Normally, you can leave this field Disabled. If you have installed new add-on ROM PCI/ISA BIOS (2A5LHU4A) device and the system configuration has caused a serious conflict that the operating...
  • Page 23 User’s Manual IDE HDD Block Mode This allows hard disk controller to use the fast block mode to transfer data to and from hard disk drive (HDD). Select Enabled only if hard drives support block mode. IDE Primary/Secondary Master/Slave PIO The four IDE IPO (Programmed Input/Output) fields allow setting a PIO mode (0-4) for each of the four IDE devices which the onboard IDE interface supports.

  • Page 24: Agp-Bus Vga Feature

    ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses DVD-video playback. The dual video playback is capable of overlaying windows Chapter 4. VGA, LCD, DOC, IDE for videoconferencing and multimedia displays. By using an extended 16-bit capture / ZV port the onboard VGA controller can support DTV resolution. This...

  • Page 25: Pci Bus Audio Adapter Feature

    User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses The flat panel interface provides or supports the following functions for various 4-4. DiskOnChip Feature panels: • Generates flat panel interface signals like FLM, LP, SCLK, and DE On board reserved is a 32-pin Socket for DiskOnChip 2000, it is a unique data •...

  • Page 26: Driver Utility Installation Guide

    User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses Realtek 8139 LAN Driver Installation Procedure. Chapter 5-9 the 4-5. Driver Utility Installation Guide VGA Driver: Install the VGA driver for on-board AGP VGA adapter www.via.com.tw Please download or check from VIA Web-site:...

  • Page 27: Features

    ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses Chapter 5. LAN Adapter 5-2. UTP Cable / RJ-45 Jack Definition Straight through twisted pair cable is typically used to connect a hub to a server or workstation. In a straight through connection, Pin 1 at the server, Pin 2 at the hub The on-board LAN adapter use of Single Chip Fast Ethernet Controller, that is connects to Pin 2 at the server, and so on.

  • Page 28: Connecting 100Base-Tx Fast Ethernet Network

    User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses • UTP cable should meet the following requirements: 5-3. Connecting 100Base-TX Fast Ethernet Network 1. Solid copper 2. Nominal capacitance: less than 16pF/ft The system board provides an RJ-45 port for connection to 100Base-TX Fast Ethernet or 10Base-T Ethernet Network with a single connection over unshielded 3.

  • Page 29: Led Indicators

    User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses 5-7. LED Indicators Note: Before running the setup program, make sure the adapter’s driver is not loaded, otherwise unpredictable results may arise! The system board comes with two LED indicators on the edge of the motherboard that indicates the network system status.

  • Page 30: Lan Driver Installation Procedure

    User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses • Diagnostics On Board: Performs on board basic function verification 5-9. The Realtek 8139 LAN Driver Installation Procedure: • Diagnostics On Network: To run this test on the network, you will need...

  • Page 31: Appendix A: Flash Memory Utility

    PS/2 Keyboard / Mouse Pin Header Connector Using this utility to update the system BIOS from a disk file to the on board Flash (ENDAT-5701: CN4; ENDAT-5901: CN6) memory. Be aware the improper change of the system BIOS will cause the system to malfunction.
  • Page 32 User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses VGA Connector LCD Panel 18Bit / 16Bit TFT/DSTN Mapping Pin No. Description Pin No. Description Signal 16Bit DSTN 18Bit/18+18 TFT Pin No. N.C. FPD23 GREEN N.C. FPD22 BLUE FPD21 DDC DAT N.C.
  • Page 33 User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses LCD Connector1: (CON1) Audio Output Port Connector (5701:CN7; 5901:CN10) Pin No. Description Pin No. Description Pin No. Description Pin No. Description A_BIT_CLK TV_COMP A_SD_IN TV_LUMA A_SD_IN2 TV_CRMA VDDLCD(+3.3v) VDDLCD(+3.3v) A_SD_OUT ENPVEE A_RESET...
  • Page 34 User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses HDD LED (5701:J3; 5901: J4) Expansion Slot to PCI/ISA Pin Assignment Pin No. Description Description A Description B Description E Description F LED － LED ＋ -IOCHK RSTDRV Power – LED (5701:J3; 5901: J4)

  • Page 35: Appendix C:limited Warranty

    LA19 IRQ13 the hardware and does not cover products that have been modified or LA18 IRQ14 subjected to unusual electrical or physical stress. Unicorn Computer Corp LA17 -DACK0 AD13 AD10 is not liable to repair or replace defective goods caused by improper using...
  • Page 36 User’s Manual ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses RMA SERVICE REQUEST FORM Issue Code of defect. Second Times R.M.A. 11 Memory Socket Bad When requesting RMA service, please fill out this “RMA Service No Screen (No Boot) 12 Hang Up Hardware Request Form”.

This manual is also suitable for:

Endat-5901

Table of Contents