Playing Music (Cd/Usb/Ipod) - Kenwood KDC-610U Quick Start Manual

Playing music (CD/USB/iPod)

Disc slot
[Control] knob
[ 1 / 6 ] [ E / F ] [ R / S ]
Playing a disc
Open the Disc slot cover upward.
Insert a disc in the Disc slot.
When it is inserted, the source is
switched automatically and playback
starts.
Close the Disc slot cover.
Playing a USB device/ iPod
Connect a USB device or iPod to the USB
terminal as shown above.
When it is connected, the source is
switched automatically and playback
starts.
You can connect the iPod or USB device
to either one of the USB terminals
provided at the front and rear of this unit.
If you connect it to the rear USB terminal,
the "REAR USB" indicator stays lit.
[1] optional accessories
When connecting devices featuring the
Lightning connector, KCP-iP102 (optional
accessory) and Apple Lightning to 30-pin
Adapter are necessary.
Do not keep Apple Lightning to 30-pin
Adapter in your car to avoid the damage
by heat.
8 | Quick Start Guide
[ G ]
Disc slot cover
REAR USB indicator
Selecting an audio file folder
Press [R] or [S].
Selecting a song (track or file)
Press [E] or [F].
Fast-forwarding or fast-
backwarding a song (track or file)
Press and hold [E] or [F].
Pause and play a song (track or
file)
Press and hold [1/6].
CA-U1EX [1]
KCA-iP102
[1]
USB Terminal